Horizontal Hinge Door CSSD Sterilizer 600 Liter With Built-in Steam Generator

Brief

The new, recently designed sterilizer was created through careful selection of materials,

components and technical solutions that ensure durability, productivity and functional safety

at every moment.

All of our machines are constructed according to a high standard of reliability and hygiene.

Principle features

• Sterilization chamber made of AISI 316L stainless steel, jacket and door built in 304 stainless steel.
• High resistance to corrosive attack thanks to the electrolytic polishing treatment.
• External heating of the chamber (with steam) for 95% of the surfaces and elimination of cold areas.
• The seal between the chamber and the door is achieved with an inflatable gasket, completely

eliminating the loss of vacuum/steam.
• Completely dry vacuum pump compatible with high-performance steam without the use of water.
• Tri-Clamp system for the tubing related to the main systems.
• Reduced weight structure for easy installation, facilitating positioning on the ground and connection to utilities.
• Easy, intuitive management through a colour, touchscreen interface.

Specifications

Main components

Vacuum system: Through a vacuum pump, unibody type, with water ring. The system is

responsible for the vacuum pulses in the initial conditioning of the load and in the final drying.

Steam generator: The generator is built in AISI 304 stainless steel, with automatic supply through

water centrifugal pump. The generator has thermal insulation through rock wool blanket which is

protected by a safety valve calibrated and sealed in the operational pressure. The water level is

controlled by a float valve, regulated to indicate high or low levels which control the water feed

and the safety level, cutting off the power supply of the resistances in case of lack of water.

Built - in steam generator

Brochure load down from here

Medpharm medical large steam autoclave brochure.pdf