Double girder high technique cabin control 50TONS electric winch type engineering rail gantry crane
1. Short description for 50TONS electric winch type engineering rail gantry crane
Double girder winch type engineering rail gantry crane has two hooks: main hook and secondary hook, it's working duty A3. Its lifting and travelling mechanism is an electric winch. It is suitable for outdoors where work is not frequent. The working environment temperature is -40 ℃ to + 40 ℃. We recommend it when you need to lift goods weighing less than 100 tons.
2. Main technical parameters for 50/10 TONS Electric travelling rail double girder winch type engineering gantry crane:
Lifting capacity | t | 50/10 |
Span | m | 38 |
Lifting height | m | Main hook: 16 Secondry : 18 |
Working class | / | A3 |
Lifting speed | m/min | Main : 1 Secondry :7 |
Handcart travelling speed | m/min | 5 |
Cart travelling speed | m/min | 10 |
Total weight | t | 76.5 |
Total handcart weight | t | 7.5 |
Max. wheel pressure | kN | 230 |
Steel track | kg/m | 43 |
FEATURE:
1, Four legs traveling on the ground through rail.
2, Could be used outdoors, especially the wind outdoors.
3,Six action movement direction
4, Normally used for the engineering.
5, Light working duty:A3
4, Full safety system as follows:
Weight overload protection
Emergency stop system
Over current protection
Short-circuit protection
Phase sequence protection
Zero position protection
Voltage loss protection
Limit switch and stopper for crane long traveling and cross traveling
Overhigh lift and overlow lift limit switch
Product Detail:
1. Pre-sale service: Professional sales team, each sales staff have professional export sales experience, and proficient in foreign languages. We have nearly 300 senior engineers to give you the best design solutions.
2. Quality inspection service: Our company has created a complete system for ensuring technological processes. The Technical Department is responsible for the development and management of the process. To ensure special processes for quality stability, the entire company has formulated 17 different process codes, 6 general technical specifications and operation instruction cards for each process., which fully guarantees, that the product quality meets the design requirements of the drawings.
3. After-sales service: Professional after-sales service team: we can arrange technicians to your factory for free to provide you with technical guidance and installation services.
FAQ:
1). How many operating methods for my selection?
Standard operating methods: A: pendent controller with push buttons .B: remote control with push buttons C: cabin(space capsule seat) control with joystick. Choose any type as you like.
2). Can this type work in hazardous environment?
Sure! We can customize for you, acid proof or explosion proof, no problem for that.
3). Can you provide the serious lifting tools?
Sure, we can provide any lift tools such as lift sling belt, lift clamp, grab, magnet or other specials as your requirement!
4). How can we install the crane?
Our senior engineer can be your side to do the installation guide service and training. Moreover, our best sales can visit your country.
5). Safety device
Overload limiter, Limit Switch (lifting and traveling), Interlock protection device.