Good visibility 358 welded mesh fencing durable commercial fencing

Brief Introduction of Good visibility 358 welded mesh fencing

358 fences are recognized as one of the most difficult to break through the barrier, because it is difficult to climb. It is called security fencing and high- strength fencing. 358 security fencing panel can be bent in part to enhance the aesthetic effect.

The closeness of the horizontal wires in this Anti-climb fence also makes for a mesh panel almost impossible to grip, thus climb, when used as part of a fencing system, and thus the name “Anti-climb“.

The mesh apertures are finger/toe proof and are designed such as to give excellent visibility through the mesh, both from perpendicular and angled directions. The welded mesh panels have a non-aggressive appearance with pleasant aesthetics, further adding to their pre-eminence over other wire fencing panels.

Specification of Good visibility 358 welded mesh fencing

Mesh length × mesh width × wire diameter: 3" × 0.5" × 10# = 76.2mm ×12.7mm × 3.2mm.
Material: low carbon steel wire.
Tensile Strength of wire: 500-750 N/mm².
Process: strong and durable welding.
Mesh size: 76.2mm × 12.7mm.
Fence length : 2m, 2.5m, 3.0m as standard.
Height: 1.5m, 1.8m, 2m, 2.4m, 2.7m, 3.0m, 4.0m, 5.2m.

Application of Good visibility 358 welded mesh fencing

Prison security fence.

Military sites security fence.

School security fence.

Warehouse security fence.

Airport & seaport security fence.

Hospital security fence.

Factory security fence & gate.

Power station fence.

Pedestrian bridge screens.

Walkway security fence.

Animal enclosure.

Benefits of Good visibility 358 welded mesh fencing

358 Mesh Fence offering the following benefits:

Anti-climb: More small openings,no toe or finger holds.

Anti-cut: robust wire and welded joints make cutting very difficult.

Better visibility: Flat,two-dimensional profile,easier to see through than chain link.

Alarm: We can install electric alarm on this high security fence.

Our survice:

1. Before the order can be confirmed finally, we would strictly check the material, color, dimension of the sample step by step.

2. Our salesman, also as an order follower, would trace every phase of production from the beginning.

3. After the worker finished the production, our QC will check the overall quality.If not pass our standard will rework.

4. When packing the products, our Packing Department will check the products again.

5. Any small problem happening in our product will be solved at the most prompt time.