The end of the highway waveform guardrail plate is used in the round head type or ground anchor type, the ground anchor guardrail is at the end of the road guardrail, will our guardrail bending, side and road guardrail connected, the other side through this Angle, buried in the earth, at the beginning or end of the road play a guiding or extension role. If the out-of-control vehicle hits the front of the end, there is a possibility that the guardrail may penetrate the car. Therefore, ground anchor type end treatment can be adopted according to the needs of the road section. This end treatment uses the inclined Angle of waveform beam to gradually extend to the ground, and is directly anchored underground with concrete foundation at the end, without the need for additional end beam installation. In the frontal collision of the runaway vehicle, the vehicle will climb up along the diagonal waveform beam and absorb energy. When side impact, it also has better guiding function. The purpose of setting the end of the corrugated guardrail is to eliminate the potential safety hazard of the end. According to the survey, the vast majority of the hazards are caused by the insertion of wavy guardrail boards into cars. First of all, to eliminate the hidden danger is to avoid the waveform guardrail plate inserted into the car, the vehicle and the human body caused injury; Secondly, the use of clever design, so that the waveform guardrail plate end in the impact of energy absorption, reduce the speed of the vehicle, and reduce injuries. Under the premise of achieving the above two requirements, we should also ensure the basic function of the waveform guardrail plate, that is, prevent vehicles from rushing out of the lane, to ensure the safety of vehicles.