Color Coated Colis Roof Panel Roll Forming Machine , IBR Sheet Roll Forming Machine


Technical Parameter

Machine List

Profile Drawing






Working Flow

Technical Data

• Un-coiler

De-coiling Holder: about 1500mm×1500mm×1700mm

​

• Roll forming machine​

1. Rolling Speed : 0-12m/min(cutting time is not include)
2. Steel sheet Thickness: 0.3-0.8mm galvanized sheet, color painted coils
3. Max roller height: Max 180 mm
4. Control System: PLC Panasonic
5. Roller Stations: about 18 stations
6. Roller Material : 45# forge steel, coated with chrome
7. Shaft Material and DIA: ￠75mm,material is 45# forge steel, Chrome with quenching
8. Maim Motor Power: 7.5kw Anhui wannan Brand
9. Hydraulic Pressure: 12Mpa
10. Material Of The Stations: Wall plate thickness 16mm
11. Tolerance: +1.5mm
12. Power supplier:380V, 50HZ,3 phase
13. Way Of Drive:1.2 inch single chain
14. The size of the forming machine:7000*1300*1000mm
15. Machine weight: about 6 tons
16. Angle accuracy: +-1degree

• Hydraulic Cutting​

1. Cutting motion: The main machine stops and then cut automatically. After cutting, the main machine re-starts automatically.
2. Material of blade: CR12 with heat treatment
3. Length measuring: Automatically
4. The cutting thickness: 0.3- 1mm
5. Hydraulic Station Power: 4 KW

• Hydraulic station

It is controlled by oil pump. After filling the hydraulic oil into

the hydraulic oil tank ,the pump drive the cutter machine to begin the

cutting job.

Components: The system includes a set of hydraulic tank, a set of hydraulic

oil pump, two hydraulic pipes. and two sets of electromagnetism valves.

​

• Out tables

Size:4000*1350*1000mm

​

• Control Box​

1. Power supplier: 380V, 50 Hz, 3Phase (adjusted with the requestment)
2. Length & quantity measurement automatically;
3. Length & quantity controlled by PLC
4. Length inaccuracy can be amended easily.
5. Control panel: Button-type switch and touch screen
6. Unit of length: millimeter (switched on the control panel)
7.