Width 380mm Thickness 16mm PU Sandwich Panel Production Line For Exterior Wall

One Set of PU Foaming Machine

One set of PU two component Liquid mixing and injecting section for foaming : it adopt high pressure pump. It have the temperature control system and material-level monitoring system. The tank of the material is about 300L./Two tanks. Injecting proportion is A:B=1:125(A :black B:white ).

Cutting: pneumatic piston driving, non-stop cutting via sliding table

Electronic controlling system: full-frequency PLC controlling system.

​PU Conveyor machine

1. The PU sandwich panel is be conveyed by double aluminium block.

2. The length of the BELT machine is about 24m, which consists of upper frame and lower frame, each frame has two sections.

3. The width of rubber board is 1mm, the range of adjusting distance between upper and lower rubber board: 300-500mm.

Panel automatically cutting system

1. Cutting adopts tracking cutting.

2. Band saw (or fly saw) of the cutting machine can move transversely 1000mm, Cutting machine moves longitudinally and transversely along the slide way.

3. Cutting machine adopts one-side blade band saw manner, cutting and revolving after cutting. The cutting saw can revolve, so cutting in two directions is realizable.

4. There is panel tight-pressing system (pneumatic) in the cutting machine;

5. There is location limiter to limit longitudinal and transverse motion of cutting machine.

Sample photo for reference:

1. Low pressure P.U. foam dispensing machine complete with: VOLTAGE:THREE PHASE , 380V, 50HZ

2. 2 set of pumps mounted with separate motors

3. 1 set of Touch Screen Operator Panel with synoptic graphics and alarm messages and 1 set of PLC

4. 2 set of flow transducers

5. 2 set of 300 liter pressurized carbon steel Jacketed tank

6. 1 set of Temperature control system for each tank

7. 1 set of 2 component Mixing head:the mixing head speed can be adjusted steplessly .

8. Injection section: it also can adjusted toward left, right, front or back. There’s rail for all the movement.

1: Coil width: max 500mm effective width: 360 and 200mm

2: working speed: 12-15m/min

3: roll station: max 20 stations

4: material of roller: grade 45 steel, polished and coated with chrome

5:material of main shaft:45﹟forge steel diameter roller: Ф60mm

6: main power: max 7.5KW

7: forming thickness: 0.4mm—0.8mm , zinc and color steel, G250Mpa

8: Transmission: by single Chains 1.2inch

9: feeding and guide: surface polished and coated with chrome

10: machine drive parts adopt protect cover

11: machine adopt new station with chrome

12: size of main machine: Approx.8750x1500x 1200(mm) L x W x H

13: weight: about max 4000Kgs

14: color of machine: blue (also can choose by customer request)

15: machine should be with four legs (made from metal) in 350mm