What kind of material of this steel door frame machine supported?
Processing material: colored steel plate, galvanized plate, or aluminium plate
Material thickness: 0.8---1.2mm
Material hardness: 550 mpa---350 mpa
Material width: 200mm(according to the drawing)
Formed width: 101.6mm (according to the drawing)
Forming speed:12m/min
TECHNICAL PARAMETERS
EQUIPMENT LIST:
1. Hydraulic Decoiler with Breaking device is equipped for coil processing.
2. Leveler
3. Servo Roll Feeder
4. Online Multi Station Hydraulic Punching Equipment
5. Rollformer with tooling
6. Hydraulic cut-off machine
7. Run Out Table or automatic stacking device
8. Mitsubishi (Japan) PLC and Touchable Screen are used for data processing and setting.
9 Roll forming speed is 10~ 20 meter / minute.
(10) Suitable Material: CRC/ Aluminium
(11) Material Width: as per Profile
(12) Material Thickness: 1 ~1.5 mm

Uncoiler System for door frame roll forming machine?
Usage:It is used to support the steel coil and uncoil it in a turnable way.
Passive uncoil pulled by roll forming system
Loading capacity: 3T
Uncoiling width:500mm
Inner diameter: 450-550mm

Shearing Mechanism of steel door frame machine:

Feature : Ensure stability, precision and cutting speed
Function Material of blades : Gcr12 quenched
Power supply : hydraulic power
Frame : Pillar style with rack & pinion system
Stroke switch : non-contact photoelectric switch :It adopts the hydraulic drive and automatic location to decide the dimension and cut the
target products Automatic cutting controlled by PLC
SPECIFICATION:
1. Decoiler.
2. Leveler
3. Branded Roll Feeder
4. Online Multi Station Hydraulic Punching Equipment
5. Roll former with tooling
6. Hydraulic cut-off machine
7. Run out Table or automatic stacking device
8. Delta/ Mitsubishi (Japan) PLC and Touchable Screen are used for data processing and setting.
9. Roll forming speed is 10 ~12 meter / minute.