Duplex Stainless Steel Pipe ,A/SA789, A/SA790, A/SA928,DIN17456/17458,EN10216-5 UNS S31803, S32205, S32101, S32304, S32750
Duplex and Super Duplex Pipes and Tubes |
Duplex Stainless Steel have a structure that contains both ferrite and austenite. Duplex alloys have higher strength and better stress corrosion cracking resistance than most austenitic alloys and greater toughness than ferritic alloys, especially at low temperatures. The corrosion resistance of duplex alloys depends primarily on their composition, especially the amount of chromium, molybdenum, and nitrogen they contain. |  |  |  | UNS S31803 Pipe&Tube | UNS S32205 Pipe&Tube | UNS S32750 Pipe&Tube | U Bend Duplex Tube | Standard: ASTM/ASME A/SA789, A/SA790, A/SA928, DIN17456/17458, EN10216-5. After negotiation, we can supply pipe with customers'requirement. Material Grade:UNS S31803,S32205,S32101,S32304,S32750,S32760,1.4462,1.4410etc. Size Range: Stainless Steel Seamless Tube | ASTM A789/A789M: OD: Φ12.7mm-Φ203mm; WT:0.5mm-6.35mm | Stainless Steel Seamless Pipe | ASTM A790/A790M: OD: Φ6mm-Φ325mm; WT:0.5mm-30mm | Stainless Steel Welded Tube | ASTM A789/A789M: OD: Φ12.7mm-Φ203mm; WT:0.5mm-4.0mm | Stainless Steel Welded Pipe | ASTM A790/A790M: OD: Φ10mm-Φ2000mm; WT:0.5mm-40mm (OD≤630mm for single seam; OD>Φ630mm For circumferential seam) | ASTM A928/A928M: OD: Φ10mm-Φ406mm; WT:0.5mm-10mm | |
 | U Bend Duplex Tube | Standard: ASTM/ASME A/SA789, A/SA790, A/SA928, DIN17456/17458, EN10216-5. After negotiation, we can supply pipe with customers'requirement. | Material Grade: UNS | EN | DIN | C % | Cr% | Ni% | Mo% | N% | Other % | S31803 | 1.4462 | X2CrNiMoN22-5-3 | 0.030max | 21.0-23.0 | 4.5-6.5 | 2.5-3.5 | 0.08-0.20 | / | S32205 | 1.4462 | X2CrNiMoN22-5-3 | 0.030max | 22.0-23.0 | 4.5-6.5 | 3.0-3.5 | 0.14-0.20 | / | S32101 | 1.4162 | | 0.040max | 21.0-22.0 | 1.35-1.70 | 0.10-0.80 | 0.20-0.25 | Cu 0.10-0.80 | S32304 | | | 0.030max | 21.5-24.5 | 3.0-5.5 | 0.05-0.60 | 0.15-0.20 | Cu 0.05-0.60 | S32750 | 1.4410 | X2CrNiMoN25-7-4 | 0.030max | 24.0-26.0 | 6.0-8.0 | 3.0-5.0 | 0.24-0.32 | Cu 0.50max | S32760 | | | 0.050max | 24.0-26.0 | 6.0-8.0 | 3.0-4.0 | 0.20-0.30 | Cu 0.50-1.00 | Mechanical Property: UNS | Tensile Strength Min, Mpa | Yield Strength Min, Mpa | Elongation in 2 in Or 50mm Min, % | Hardness Max, HRC | S31803 | 620 | 450 | 25 | 30 | S32205 | 655 | 485 | 25 | 30 | S32101 | 700 | 530 | 30 | 30 | S32304 | 690 | 450 | 25 | 30 | S32750 | 800 | 550 | 15 | 32 | S32760 | 750 | 550 | 25 | 32 | Size Range: Stainless Steel Seamless Tube | ASTM A789/A789M: OD: Φ12.7mm-Φ203mm; WT:0.5mm-6.35mm | Stainless Steel Welded Tube | ASTM A789/A789M: OD: Φ12.7mm-Φ203mm; WT:0.5mm-4.0mm | |