ASTM A789 / ASTM A790 SUPER DUPLEX STEEL S31803, S32205, S32750, S32760, S31254 RAW MATERIAL YONGXING SPECIAL STEEL
CON TODO GUSTO PARA ATENDER CON LENGUA ESPAÑOLA SI TEINEN CUALQUIER INQUIERTUD
Duplex Stainless Steel have a structure that contains both ferrite and austenite. Duplex alloys have higher strength and better stress corrosion cracking resistance than most austenitic alloys and greater toughness than ferritic alloys, especially at low temperatures. The corrosion resistance of duplex alloys depends primarily on their composition, especially the amount of chromium, molybdenum, and nitrogen they contain. |
Standard: ASTM/ASME A/SA789, A/SA790, A/SA928, DIN17456/17458, EN10216-5. After negotiation, we can supply pipe with customer's special requirement. | Material Grade: Chemical Composition UNS | EN | DIN | C % | Cr% | Ni% | Mo% | N% | Other % | S31803 | 1.4462 | X2CrNiMoN22-5-3 | 0.030max | 21.0-23.0 | 4.5-6.5 | 2.5-3.5 | 0.08-0.20 | / | S32205 | 1.4462 | X2CrNiMoN22-5-3 | 0.030max | 22.0-23.0 | 4.5-6.5 | 3.0-3.5 | 0.14-0.20 | / | S32101 | 1.4162 | | 0.040max | 21.0-22.0 | 1.35-1.70 | 0.10-0.80 | 0.20-0.25 | Cu 0.10-0.80 | S32304 | | | 0.030max | 21.5-24.5 | 3.0-5.5 | 0.05-0.60 | 0.15-0.20 | Cu 0.05-0.60 | S32750 | 1.4410 | X2CrNiMoN25-7-4 | 0.030max | 24.0-26.0 | 6.0-8.0 | 3.0-5.0 | 0.24-0.32 | Cu 0.50max | S32760 | | | 0.050max | 24.0-26.0 | 6.0-8.0 | 3.0-4.0 | 0.20-0.30 | Cu 0.50-1.00 | Mechanical Property: UNS | Tensile Strength Min, Mpa | Yield Strength Min, Mpa | Elongation in 2 in Or 50mm Min, % | Hardness Max, HRC | S31803 | 620 | 450 | 25 | 30 | S32205 | 655 | 485 | 25 | 30 | S32101 | 700 | 530 | 30 | 30 | S32304 | 690 | 450 | 25 | 30 | S32750 | 800 | 550 | 15 | 32 | S32760 | 750 | 550 | 25 | 32 | |

