Embedded Finned Tube, ASTM A179 Carbon Steel Tube With Aluminum 1060 Fins For Heat Exchangers

ASTM A179 covers minimum-wall thickness, seamless cold-drawn low-carbon steel tubes for tubular, heat exchanger, condensers, and other heat transfer services. seamless ASTM A179 steel tube is supplied and produced by cold drawning method. Chemical composition contains carbon, manganese, phosphorus, and sulfur.

ASTM A179 Carbon Steel Tube contains the accompanying determinations: ASTM A179/ASME SA179 with Seamless – Hot Rolled or Cold Drawn sort, 1/4" To 2" external Diameter, 1 mm Thickness to 8 mm divider Thickness, length as 5800mm/ 6000mm/ 6096mm/ 7315mm/ 11800mm, etc upto Max length 27000mm with Plain Ends/Beveled Ends/Coupling. Measures A179 Tube Seamless Cold-Drawn Low-Carbon Steel Heat-Exchanger and Condenser Tubes, Tube Certified and Tested as per Impact Test, Heat Treated, Hardness Test, Flattening Test, Reverse Flattening Test, Flaring Test, Flange Test, Hydrostatic Test.The Carbon Steel A179 Heat Exchanger Tubes is carefully exposed to different tests so as to guarantee the nature of the item. This evaluation of the cylinder is stuffed in wooden box or case so as to maintain a strategic distance from outer harm amid the last phase of creation. These evaluations of cylinders are utilized in different modern applications and are accessible in market driving costs. You can without much of a stretch purchase this cylinder from our market sellers.

ASTM A179 Specification:

Chemical Composition (%):

Mechanical properties:

Features:

• Dimensional accuracy.
• High strength
• Durable
• Corrosion resistance
• Fine finish

Application:

• Pharmaceutical Equipment
• Chemical Equipment
• Sea Water Equipment
• Heat Exchangers
• Condensers
• Pulp and Paper Industry
• Off-Shore Oil Drilling Companies
• Power Generation
• Petrochemicals
• Gas Processing
• Specialty Chemicals
• Pharmaceuticals

Inspection and Tests Performed:
Chemical Composition inspection, Mechanical Properties Test(Tensile Strength, Yield Strength, Elongation, Flaring, Flattening, Hardness, Impact Test), Surface and Dimension Test, No-destructive Test, Hydrostatic Test

Surface Treatment:
Oil-dip, varnish, Passivation, phosphating, Shot Blasting

For a rapid quotation, plz send with following requirement:

Number of pieces,

base tube: Diameter, thickness, length and material specification.

Fins: material specification, type (solid or serrated), height, thickness, spacing, finned length and unfinned sections. Weld prep details if required.

Delivery period required.