SUS316 316L 304 304L Stainless Steel Welded Precision Capillary Tube , Industrial Application

A stainless steel capillary tube is a long, fixed-length tube with a very small diameter which is installed between the condenser and the evaporator. The capillary tube actually meters the refrigerant from the condenser to the evaporator. Because of its long length and small diameter, there is associated fluid friction and pressure drop as refrigerant flows through it. Stainless Steel Medical Capillary Tubes are characterized by tight tolerances, and the inside surface of the tubes is free from oil, grease and other particles. This ensures, for example, an optimized and even flow of liquids and gases from the sensor to the measuring instrument. This type tubing mainly used in Instrument /gauge Meter Industries, Chromatography industry, Gas and liquid lines, Measurement components in remote thermometer systems (with or without compensation) and thermoelectric couple, as well as all kinds of Heaters & Heating Elements.

Specification:

Manufacturing Technology: Cold drawn, Welded.

Delivery Condition: Pickled, polished, bright annealed, electrolytic polished.

Features:

• High precision
• High temperature resistance and abrasion resistance
• High Strength and Pressure resistance
• Excellent electromagnetic shielding performance
• Custom fabrication and deeply process available

Applications:

1) Medical device industry

2) Temperature-guided industrial temperature control, sensors used pipe, tube thermometer

3) Pens care industry core tube

4) Micro-tube antenna, various types of small precision stainless steel antenna

5) A variety of electronic small-diameter stainless steel capillary

6) Jewelry needle punch

7) Watches

8) Car antenna tube

9) Laser engraving equipment

10) Fishing gear, accessories

11) Mobile phone and computer stylus

In addition, capillary tube metering devices are found mainly in domestic and small commercial applications that experience somewhat constant heat loads on their evaporators. These systems also have small refrigerant flow rates and usually employ fully hermetic compressors. Manufacturers use capillary tubes due to their simplicity and low cost. In addition, most systems employing capillary tubes as metering devices do not require high-side receivers, which add to another cost savings.