ASTM A312 253MA / UNS S30815 / EN 1.4835 Pickled Annealed Stainless Steel Seamless Pipe

ASTM A312 grade 253MA, also written as UNS S30815 and EN 1.4835, refers to a specific type of stainless steel with enhanced properties. Stainless steel 253MA is an austenitic stainless steel known for its excellent resistance to high-temperature oxidation and good creep strength. It is primarily used in applications that require high resistance to heat and corrosion.

Summary of Advantages of 253MA:

1. Exceptional high-temperature strength.
2. Excellent oxidation resistance in severe environments.
3. Maintains mechanical properties at elevated temperatures better than most common grades.
4. Good weldability, retaining the beneficial characteristics of base metal.

Chemical Composition of ASTM A312 253MA Stainless Steel Seamless Pipe

Physical properties of ASTM A312 253MA Stainless Steel Seamless Pipe

Mechanical Properties of ASTM A312 253MA Stainless Steel Seamless Pipe

Comparison of ASTM A312 253MA with Other Common Stainless Steels

1. High-Temperature Performance:

   • 253MA: Designed to withstand high temperatures (up to about 1100°C) without losing mechanical strength, making it suitable for applications in waste incineration and energy generation.
   • 304/304L: Can handle moderate temperatures but not designed for high-temperature applications. It may lose strength at elevated temperatures.
   • 316/316L: Similar to 304 but provides better corrosion resistance, especially in chloride environments. Not optimized for high temperatures.

2. Corrosion Resistance:

   • 253MA: Offers excellent resistance to oxidative environments, particularly in high-temperature applications. Superior to 304 and comparable to 316 in certain environments but focused more on high-temperature oxidation resistance.
   • 304/304L: Good corrosion resistance in many environments but may suffer from pitting in saline conditions.
   • 316/316L: Superior to 304 with better resistance to pitting and crevice corrosion, especially in marine environments.

3. Mechanical Properties:

   • 253MA: Features high yield strength and good ductility at elevated temperatures, making it suitable for stress-bearing applications. Its tensile strength remains high even at temperatures exceeding 600°C.
   • 304/304L and 316/316L: Generally exhibit lower yield and tensile strength compared to 253MA, particularly at elevated temperatures. More suited for structural applications that don’t require high strength under heat.

4. Weldability:

   • 253MA: Offers good weldability but requires careful control of heat input during welding to avoid issues such as sensitization. Its welds can maintain the properties of the base metal when done correctly.
   • 304/304L: Very good weldability; often used for general-purpose welding applications.
   • 316/316L: Also has good weldability, but its higher alloy content can require special considerations in some welding scenarios.

5. Cost:

   • 253MA: Typically more expensive than 304/304L and 316/316L due to higher alloy content and specific composition aimed at high-temperature performance.
   • 304/304L and 316/316L: More cost-effective for general applications that don't require the specific advantages of 253MA.

6. Applications:

   • 253MA: Ideal for high-temperature applications such as gas turbines, waste-to-energy plants, and heat exchangers.
   • 304/304L: Widely used in food processing, kitchen appliances, and chemical containers.
   • 316/316L: Commonly found in marine environments, chemical processing, and medical devices.

Apllications

Chemical Processing

Pharmaceutical & Bio-Medical

Petrochemical & Refinery

Food Processing

Chemical Fertilizer

Sewage Disposal

Desalination

Waste Incineration etc.

Heat Exchanger