MachineU > China Products > Machinery > Machine Tool Equipment > Metal Cutting Machinery > Other Metal Cutting Machinery
Carbon Galvanized Steel Sheet Slitting Machine Simple Hydraulic RS 3.0-12.0
Carbon Galvanized Steel Sheet Slitting Machine Simple Hydraulic RS 3.0-12.0
Specifications
Brand Name :
RISHBIN
Model Number :
RS 3.0-12.0
Certification :
CE
Place of Origin :
Wuxi， China
MOQ :
1 PCS
Price :
Negotiable
Payment Terms :
L/C, T/T, Western Union
Packaging Details :
Cartoon
Product Name :
Steel Sheet Slitting Machine
Strip Width :
≥100mm
Slitting Accuracy :
±1.0mm
Coil I.D :
φ508,φ610,φ760mm
Color :
Requirement
Type :
Coil Slitting line
Description
Carbon Galvanized Steel Sheet Slitting Machine Simple Hydraulic RS 3.0-12.0
Edge trim:
This edge trim is taken up on a scrap winder. If the material to be slit is extremely thin, a looping pit can be used to take up the varying thickness of the mults as the edge cuts are generally thinner than the center cuts. The thin the material, the longer the lineal footage in the master coil.
The looping pit will take up the additional volume prior to entering the tension stand. The tension stand is located prior to the recoiler. A tensioning device is needed because the master coil is crowned or larger in diameter in the center of its width than at the edges.

Without a tension stand, the slit material from the center of the master coil would take up more quickly while the outboard strips would hang loosely. The recoiler is an expanding mandrel type. The recoiler takes up the slit mults. The recoiler mandrel is fitted with an overarm device which is a shaft with separator discs which prevent interleaving of the narrower coil widths.

The position of the discs are directly in-line with the slitting knives. The finished slit mults are banded on the outside diameter and are pushed off of the recoiler mandrel onto an awaiting coil car or turnstyle.

Steel Sheet Slitting Machine​ Introduction
  • Minimum Burr on strip.
  • Automatic Coil Loading
  • 2 complete slitting heads for quick offline tooling changeovers.
  • Straight edged recoiling.
  • Economic efficency due to high automation level.
  • Ease of Operation and Maintenance
  • Slitting Lines are available in different sizes and models as per the demands and specifications laid by the clients.
  • It is available in different capacities and standards according to the demand of the clients.
  • These Slitting Lines are widely appreciated amongst our clients for their user friendly designs and high resistance to temperature variations.

Knives:

These knives partially penetrate the coil stock causing a crack or fracture on both sides of the stock, separating the mults from one another. Rubber stripper rings are also employed depending on the material thickness to attain a good edge so no burr is present that will hinder downstream operations. As the material is slit, the far outside edges of the coil have edge trim.
Steel Sheet Slitting Machine Specification:
Model No. RS 3.0-12.0 RS 4.0-16.0 RS 6.0-20.0
Coil Material CR Coils , HR Coils, S.S Steel Coils, GI Coils, AL Coils, Copper Coils Picking Oil Coils
Coil Thickness 3.0～12.0mm 4.0～16.0mm 6.0～20.0mm
Line Speed 0～60m/min 0～50m/min 0-50m/min
Coil Weight ≤30T(35T) ≤30T(35T) ≤30T(35T)
Coil I.D φ508,φ610,φ760mm φ508,φ610,φ760mm φ508,φ610,φ760mm
Coil O.D ≤φ2200mm ≤φ2500mm ≤φ2500mm
Strip Width ≥100mm ≥100mm ≥100mm
Number of Strip 5～20 ≤5 ≤5
Slitting Accuracy ±1.0mm ±1.0mm ±1.0mm
Blade shaft Ф320 Ф340mm Ф360mm
Electrical Control System PLC Automatic control PLC Automatic control PLC Automatic control
COIL/ROLL DETAILS Material HR, CR, SS, GI, PPGI,
Tensile Strength δb≤550Mpa,δS≤260Mpa
Coil/Roll thickness 6-20mm
Steel Coil/Roll width 600-2500(Max)
Coil/Roll I.D Φ500-760 mm
Coil/Roll O.D Φ2500mm(Max)
Steel Coil/Roll Weight 35T(Max)

Slitter parameters

 knife pivot diameter Ф360 mm
Knife pivot material 40Cr
Blades specification Φ360mmXφ360mmX20mm
Blade material 6CrW2Si
Max slit quantity 4 pcs (16mm) 8 pcs(8mm)(Customized)
Width precision ≤±0.05mm/2M

Other parameters

 Power 380V/50Hz/3Ph(Customized)
Line speed 0-60m/min
Capacity 450 KW
Whole line Dimension 45m(L)X10m(W)
Line direction From right to left(Face to machine)
Machine color Blue

Product tags

membrane panel welding machine

,

cnc pipe benders

,

cnc pipe bender
Send your message to this supplier
Send Now

Carbon Galvanized Steel Sheet Slitting Machine Simple Hydraulic RS 3.0-12.0

Ask Latest Price
Product Detail
Brand Name :
RISHBIN
Model Number :
RS 3.0-12.0
Certification :
CE
Place of Origin :
Wuxi， China
MOQ :
1 PCS
Price :
Negotiable
Contact Supplier
Carbon Galvanized Steel Sheet Slitting Machine Simple Hydraulic RS 3.0-12.0

RISHBIN CO., LTD

Active Member
7 Years
jiangsu, wuxi
Since 1999
Business Type :
Manufacturer
Main Products :
Steel Slitting Line, Steel Coil Slitting Line, Metal Slitting Line
Total Annual :
1000000-1200000
Employee Number :
100~120
Certification Level :
Active Member
Discover similar products
View More

Find Similar Products By Category:

Supplier Homepage Products Steel Sheet Slitting Machine
MachineU China Products Machinery Machine Tool Equipment Metal Cutting Machinery Other Metal Cutting Machinery
Contact Supplier
Submit Requirement