0.3-100mm Thickness Material 201 202 Cold Rolled Sheet Ss304 Stainless Steel Coils

Stainless steel coil open flat
Stainless steel coil most factory is the whole volume, mainly for convenient transportation; To our zhongxing yide stainless steel processing factory hands, in order to facilitate processing and manufacturing, will be stainless steel volume with professional stainless steel leveling equipment, the whole volume of stainless steel leveling, this process is called leveling.
In order to prevent the deformation of cold rolled plate after opening, it is best to put cold rolled plate flat, the number of words can be pressed together with spacer plate; And pay attention to the moisture, otherwise it will be deformed.

Of course, you can also put the cold rolled plate standing, but not too long, otherwise it will also be deformed, unless the thickness of the cold rolled plate is more than 2.0mm.
Stainless steel in the factory when most of the plate roll, and are standard width, such as 1219mm1500mm. Some customers require to process the standard width of stainless steel coil into the required width of stainless steel tape coil, in order to process stainless steel products.

Stainless steel coil after uncoiling, stripping, leveling, winding and a series of processes into the required width of stainless steel tape coil. In addition, slitting is very important for the pipe making process.

Welding is an important process of stainless steel processing, stainless steel mainly adopts argon arc welding and plasma welding.

Argon arc welding protection gas is pure argon, mainly welding stainless steel below 3mm; Plasma welding has a strong penetration, mainly welding 5-8mm stainless steel.

In the processing of stainless steel often need to use the cutting process, cutting process and there are many types of cutting, they are divided into laser cutting, water cutting, plasma cutting, line cutting, etc..