0.13mm-1.2mm Thickness H70 C2600 C2680 C2700 Cuzn37 10mm Red Copper Coil/Sheet
Product Name | PPGI copper sheets |
Thickness | 0.13mm-1.2mm |
Width | <2000mm |
apprication | luxury indoor decoration, elevator decoration, advertising billboard,Architectural decoration, luxury doors, elevators decorating, outdoor works, ceiling and cabinets, aisle panels, screen, the tunnel project, hotels, guest houses, entertainment place, kitchen equipment, light industrial and others |
Packing | Standard export sea-worthy packing |
Payment terms | T/T L/C |
Delivery time | 8-14 days, according to the quantity |
Supply Ability | 2000 tons / month |
Brand Name | Irunt |
Place of Origin | Jiangsu, China |
Alloy Or Not | Non-Alloy |
Grade | Pure Copper |
Storage Condition | 23±5℃;55±5% RH |
Features |
|
Usage |
|
Product Description
Cu-Cr-Ag-Fe-Ti-Si alloy is a high-strength high-conductivity alloy with excellent. Electrical conductivity,
thermal conductivity, stress relaxation resistance, excellent cold workability. Widely used in Plug
components on automotive, electrical equipment, etc.. With the rapid development of miniaturization
and high-density of Device,it is also used in the companents for the electrical industry.
Mechanical Properties
Density(g/cm3) | 8.92 |
Electrical conductivity{IACS%(20ºC)} | 79 |
Modulus of elasticity(KN/mm2) | 140 |
Thermal conductivity{W/(m*K)} | 320 |
Coefficient of thermal expansioon(10-6/ºC 20/ºC~100/ºC)
| 17.6 |
Temper | Tensile Strength | Elongation A50 | Hardness |
(Rm,Mpa) | (%) | (HV) | |
R480 | 480-560 | ≥7 | 140-170 |
R540 | 540-630 | ≥2 | 150-180 |
TR08 | 520-620 | ≥7 | 160-190 |
The content of pure copper is 99.5~99.95%. It is soft metal, purplish red.
Good ductility, high plasticity. High thermal and electrical conductivity (second only to silver). High corrosion resistance (sea water, atmosphere), good welding performance, no magnetic conductivity.
It can be recycled many times without loss of mechanical properties.
Melting point (elemental) : 1083℃
Boiling point (elemental) : 2562℃
Density: 8.969 g/cm3
Hardness: 3 (Mohs) 35-45 (Brinell HB)
Thermal conductivity: 401 W/ M.K.
Common copper grade: T1 T2 T3 T4 (50 yuan/kg)
Copper without oxygen: TU1, TU2
Deoxidized copper: TPU
Brass is a yellow alloy of copper and zinc. It has excellent mechanical properties and strong wear resistance. When zinc content is less than 35%, zinc can dissolve in copper to form single phase A, called single phase brass, good plasticity, suitable for hot and cold processing.
When the zinc content is 36%~46%, there is a single phase and copper zinc based β solid solution, called dual-phase brass, β phase makes the plasticity of brass decreased and the tensile strength increased, only suitable for hot pressure processing.
When zinc content > At 46%, the alloy becomes too hard and brittle to be useful.
The brass grade is represented by "H + number", where H represents brass and number represents the mass fraction of copper. Such as our commonly used environmental protection copper H59, H62 copper.