Pre-Engineered Steel Structure Building Construction Steel Frame Warehouse Workshop

Product Description

Pre-engineered steel structure building is one of the innovative technologies in building construction solutions. Its econimical price, convinient tranportation and quick installation make it more and more polular in construction area.
Pre-engineered steel structure building is usually component by H steel column, H steel beam, purlin, roof sheet, wall sheet, rolling door and windows, etc. All of main structure part (H column & beam) will be fixed by high strength bolts and the purlin will be fixed on the column and beam by 4.8S bolts, which makes the workshop frame erection faster than traditional concrete construction system. Pre-engineered steel structure building’s roof and wall is steel sheet or sandwich panel, which is lighter and spend less time to etect.

Product Parameters

The principle of steels selection is not only to make the structure safe and reliable and meet the requirements of use, but also to save material and reduce cost. In order to ensure the bearing capacity of the bearing structure and prevent the brittle failure that may occur under certain conditions, the following factors should be considered comprehensively: the importance of the structure, the nature of the load, the connection method, the working environment of the structure, and the thickness of the steels.

Product Features

Advantages of steel structure pre-engineered building:
1. Cost Saving
Price in one square meter using steel structure can be 25% lower than conventional buildings. Site installtion cost is lower because of faster erection time and easier erection process.
2. Quality Control
The buildings will be designed and fabricated in the factory with strict quality control. The fabrication process is strictly controlled from start to the end. It also happen on designing and engineering, as well as detailing and manufacturing at factory.
3. Quick Erection
All of steel memners are fabricated at factory and are connected by bolts and nuts at site. So the erection process is fast, step by step, easy to install.
4. Flexibility
Steel structure buildings are flexible in any requirement of design, easy to expand in the future and also economically with low transportation cost.
5. Energy Efficiency
Nowadays, steel structure buildings are the green solution for the environment with CO2 reduction, energy efficiency and recyclability.

Design and Quote

What will be need to get a price of pre-engineered buildings?
1. The local site Max. wind speed;
2. Snow load if there is snow in local;
3. Size of the building (length*width*eave height);
4. Roof and wall material;
5. There is crane inside the building or not; If have, pls confirm the lift tons;
6. Drawing or more specification if have.

Application

Pre-engineered steel structure building can be used in the construction of the following buildings:
1. High rise buildings
2. Office buildings
3. Shopping mall
4. Factories
5. Warehouses
6. Workshops
7. Logistics centers
8. Surpermarkets
9. Factories
10. Poultry buildings

Product Processing

After the customer confirms the construction drawing and the engineer draws the 3D model, the process will enter the processing step, which is mainly divided into the following steps:

1. Material Preparation

Steel materials are received and inspected for quality. They are organized and prepared for further processing.

2. Cutting and Shaping

The steel components are cut to the required sizes using cutting techniques like sawing, shearing, or plasma cutting. They are then shaped using processes such as bending, rolling, or pressing to achieve the desired form.

3. Welding and Joining

The individual steel components are joined together using welding techniques, such as arc welding or gas welding. This creates strong and secure connections between the different parts of the structure.

4. Surface Treatment

The steel components may undergo surface treatments like shot blasting or painting. These treatments help to remove impurities, improve the surface finish, and provide corrosion resistance.

5. Quality Control and Inspection

Throughout the processing stages, quality control measures are implemented to ensure that the components meet the required standards and specifications. Inspections are conducted to identify any defects or inconsistencies that need to be addressed.

6. Packaging and Storage

The finished steel components are carefully packaged and stored in the factory to protect them from damage and ensure their readiness for transportation.

XGZ Service

Xinguangzheng has decades of experience in custom designing and prefabrication of high quality steel structures. We put our customers first. We will consult with you to determine your precise needs, then creates frame, sandwich panel, roof, windows, doors and other materials to realize the best building possible for you.

Pre-sale Service

1. We will make the plan drawing and give you the accurate budget of the steel buildings according to the clients' need.

2. The professional and suitable suggestion will be offered according to local site condition.

3. To inform clients when steel price, shipping freight and exchange rate are different than before.

4. To send quality inspection report, certificate, etc. to clients.

After-sale Service

1. The detailed construction drawing will be offered.

2. Quick manufacturing and good quality material will be guaranteed.

3. Production schedule and pictures will send to you every week.

4. Our experienced construction team will come to site to install the building if need.

FAQ

1. Does your company is Manufacturer or Trading company?

We are Professional Manufacturer in this Field, so you will enjoy the best price and competitive price. Our factory covers an area of 130,000 square meters in Qingdao, Shandong.

2. How to buy idea products?

You can provide us your drawing, and we can produce as your drawings.
Or we can design as your requirements if you don’t have a clear plan. We will provide our plans according to the local climatic condition.

3. Do you offer design service?

Yes, we could design full solution drawings. Utilizing AutoCAD, PKPM, MTS, 3D3S, Tarch, and Tekla Structures (Xsteel).

4. Do you accept container loading inspection?

Yes, you are welcome to send an inspector any time.

5. Do you offer service for installation?

We will furnish you the detailed construction drawing and the construction manual which could help you to erect and install the building step by step. We also could send the engineer to your local to help you if need.