3 Inch Knotted Wire Wheel Cup Brush and Twist End Brush Set ,1/4" Shank for Drill,Perfect For Rust Removal, Corrosion and Paint

The set of knotted wire brush with shank for drill includes:

1 PCS Knotted Wire Cup Brush 75mm,

1 PCS Knotted Wire Wheel Brush 75mm

1PCS Knotted Wire End Brush 25mm.

---------------------------------------------------------------------------------------------------

Durable materials and processes:

1. The knotted wire wheel and cup brushes twist the steel wires together for increased resistance to pressure and durability.

Hardened steel wire for reduced wire breakage & long life.

2. These twisted wire brushes are suitable for removal of rust, corrosion,paint,deburring and surface conditioning.

3. Ideally suited for cleaning castings, structural steel and sheet metal.

4. 1/4"shank fits most drills. Maximum 4500 RPM.

5. The twisted wire wheel brush and knotted end brush are designed for easy access into narrow holes and confined areas.

NOTE: Remember to wear goggle or eye protection.

Applications

• Suitable for heavy duty cleaning of metal, removal of weld splatter and paint, and surface preparation
• 

Advantages

Aggressive brushing effect due to the very stiff wire knots.

Optimal access to hard-to-reach areas such as grooves and recesses.

Long tool life through use of special wire.

Recommendations for use

Please observe the recommended rotational speeds.

For the best results, use a tool drive with a minimum output of 500 watts.

Safety notes

When clamping the brush, ensure that the shank is clamped as far into the arbor as possible.

This applies in particular for use in the high rotational speed range.

Materials that can be worked

Cast iron
Steel, cast steel
Applications
Cleaning
Deburring
Derusting
Descaling
Paint stripping
Removing oxide layers
Root seam processing
Work on fillet welds
Work on weld seams