High Performance Wheel Brushes Knotted Shank Mounted 100mm OD for Derusting

This 100mm twist knot wire wheel is mounted on a 6mm shank. The wire strands are twisted together allowing more force to be applied to the tool while also achieving longer tool life. Ideal for use in a cordless drill

Details Product Description

Aggressive brush for cleaning, derusting and work on weld seams.

Steel wire is the most common filament material.

Brushes with steel wire as the filament material are especially well-suited to work on surfaces and deburring.

Our factory special wire has high tensile strength and bending fatigue strength.

This ensures that the wire wears down in the optimal way, as well as a long tool life, even in extreme brushing applications.

Steel wire withstands temperatures up to 300 °C.

• Suited for one hand angle grinders, large angle grinders and pneumatic grinders
• Removable retaining skirt for improved performance
• Information disc on brush
• Ensure correct maximum operating speed matches grinder

Applications

• Suitable for heavy duty cleaning of metal, removal of weld splatter and paint, and surface preparation
• 

Advantages

Aggressive brushing effect due to the very stiff wire knots.

Optimal access to hard-to-reach areas such as grooves and recesses.

Long tool life through use of special wire.

Recommendations for use

Please observe the recommended rotational speeds.

For the best results, use a tool drive with a minimum output of 500 watts.

Safety notes

When clamping the brush, ensure that the shank is clamped as far into the arbor as possible.

This applies in particular for use in the high rotational speed range. The minimum clamping length is 10 mm.

Materials that can be worked

Cast iron
Steel, cast steel
Applications
Cleaning
Deburring
Derusting
Descaling
Paint stripping
Removing oxide layers
Root seam processing
Work on fillet welds
Work on weld seams