Narrow Face Polyflex 8 Inch Encapsulated Wire Wheel Brushes for Heavy Deburring
1. Encapsulation provides excellent tip control, reduced flare, and aggressive brushing action.
2. Measures : 158mm X 20mm Width X 45mm ID
3. Provides excellent abrasion and wear resistance, along with high flexing action.
4. High strength filament able to remove heavy buildups.
5. Good bend recovery. Tough, cost-effective wire with high-tensile strength recommended for high speeds and long service life.
6. Crimped steel wire is best for light surface work and for removing rust.
7. Providing precisely controlled brush face, very aggressive removal rates.
8. Limited flexibility.
9. Applications: Removal of all types of electrical wire insulation.
Encapsulated wire brushes provide an aggressive cutting action for surface blending, surface preparation and rubber removal.
The wires are bonded in place with a synthetic elastomer that wears away gradually during use, exposing a short length of the wires.
| Rubber Encapsulated Wire Brush |
| 158 mm |
| 45mm |
| 20mm |
Encapsulated wire brushes provide an aggressive cutting action for heavy deburring, surface blending, surface preparation, rubber and plastic flash removal, and weld preparation.
The wires are bonded in place with a synthetic elastomer that wears away gradually during use, exposing a short length of the wires.
Encapsulated brushes are most effective on relatively flat surfaces or where a controlled brushing surface is required, and at temperatures below 180°F.