6Lines wire 2.5mm Pipeline coating mesh use in Gas & Oil Pipeline project

Pipeline coating mesh Description:

Pipeline coating mesh also called pipe coating mesh.

It is made of hot dipped galvanized material wire.The wire diameter have many kinds,Like

2.0mm,2.2mm,2.4mm,2.7mm or special custom.

Standard and uniform hole size.Normal make roll width is 190.5mm.Roll length 140m or 280m.

With hot dipped galvanized treatment can strong anti-resistant and anti-rust.So widely use in

Gas & Oil Pipeline project

Pipeline coating mesh specification list:

Pipeline coating mesh different specification for your choice:

Pipeline coating mesh Advance:

• High grade material wire make sure welded strong and long time use.
• The high degree of flexibility in the longitudinal direction of the Pipe is important for spreading and minimizing cracks
  during the laying of the pipeline.
• The exceptional continuity and uniformity enhances even more the ability of the concrete coating withstand impact.
• A coating reinforced with our Pipe Coating Mesh has uniform compressive strength.
• The high bonding level between the concrete and the reinforcement obtained by a combination of the high specific
  and an optimum spread of the reinforcement throughout the entire layer of concrete increases the impact resistance
  of the coating.
• The use of hot-dip galvanized wire extends the lifetime of the reinforcement.

Pipeline coating mesh have 4 types can choose and export:

Type-1 Type-2

Type-3 Type-4

Pipeline coating mesh uses

1. Chemical Processing Pipeline
2. Subsea Gas & Oil Pipeline
3. Everglades Gas Pipeline
4. Water and Wastewater Pipeline
5. River Bottom Gas & Oil Pipeline

Show our Pipeline coating mesh product pictures:

Our company: