Durable Hot Dipped Galvanized Chain Link Wire Mesh For Animal Enclosure
Product Description
Chain-link fence is a type of woven wire mesh usually made of galvanized or PVC-coated steel wire. The wires run vertically and are bent into a zigzag pattern so that each "zig" hooks with the wire immediately on one side and each "zag" with the wire immediately on the other. This forms the characteristic diamond pattern seen in this type of fence.
Product Specifications
Chain Link Wire Mesh
| |||
Mesh | Wire Diameter | Width | Length |
40*40 mm | 1.8 - 3.0 mm | 0.5 - 4.0m | 5 - 25 m |
50*50 mm | 1.8 - 3.5 mm | 0.5 - 4.0m | 5 - 25 m |
60*60 mm | 1.8 - 4.0 mm | 0.5 - 4.0m | 5 - 25 m |
80*80 mm | 2.5 - 4.0 mm | 0.5 - 4.0m | 5 - 25 m |
100*100 mm | 2.5 - 4.0 mm | 0.5 - 4.0m | 5 - 25 m |
Product Fetures
1. Anti-rust, anti-corrosion.
2. Modern design and attractive surface.
3. Easy installation, cost effective.
4.Visibility, durable.
5.Weather resistance, maintanance free.
6. High strength, long service life.
Product Applications
Product Installation
The installation of chain link fence involves setting posts into the ground and attaching the fence to them. The posts
may be steel tubing, timber or concrete and may be driven into the ground or set in concrete.
End corner or gate posts, commonly referred to as "terminal posts", must be set in concrete footing or otherwise anchored
to prevent leaning under the tension of a stretched fence. Posts set between the terminal posts are called "line posts" and
are set at intervals not to exceed 10 feet.
The installer attaches the fence at one end, stretches it, and attaches at the other, easily removing the excess by "unscrewing"
a wire. In many cases, the installer stretches a bottom tension wire, sometimes referred to as "coil wire", between terminal posts
to help minimize the in and out movement that occurs at the bottom of the chain-link mesh between posts.
Top horizontal rails are used on most chain-link fences, although not necessary if the terminal posts are braced correctly.
and for taller fences, like 10 feet or more, intermediate horizontal rails are often added.
Finally, the installer ties the fence to the line posts and rails with steel or aluminum wire with a hook on one end called “Fence Ties”.
The bottom tension wire should be secured to the line posts.
Product show
Packaging and delivery