Single Peak Red Powder Wind Break Dust Suppression Wall
Wind break dust suppression wall description:
Wind break dust suppression wall is using the theory of aerodynamics, in accordance with the implementation
of the environmental wind tunnel experimental results processed into a certain geometric shape, opening rate,
and different aperture combination .
Wind break dust suppression wall make the circulation of air (wind) from the outside, through the wall, the wall
on the inside of the form, the interference of air has reached to the lateral winds, medial weak wind, small wind,
the lateral inside without the effect of the wind, So as to prevent dust from flying.
Wind break dust suppression wall specification list:
Wind break dust suppression wall | ||||
Type | Forming width | Peak height | Length | Sheet thickness |
Single-peak(monomer) | 250-500mm | 50-100mm | 0-6m | 0.5-1.0mm |
Bimodal (two-body) | 400-600mm | 50-100mm | 0-6m | 0.5-1mm |
Three-peak(triplets) | 810-950mm | 50-80mm | 0-6m | 0.5-1mm |
Material | Stainless steel | Galvanized | Aluminized zinc | Al Mg alloy |
Thickness | 0.4-1.8mm or design as your need |
Hole type | most are round also can design as your need |
Color | Dark blue,light blue, green and so on |
Width | 200mm-950mm |
Length | 2.5m 3m 4m 5m 6m 7m 8m 9m 10m 11m etc |
Packing quantity | 100PCS or 150PCS per Pallet |
Packing way | In strong Pallet or In wooden box |
Export Country | USA,UK,AU,South Africa,Egypt,Sudan,Vietnam and so on |
Features:
1. Anti-ultraviolet(UV)
2. Anti-rust and Anti-corrosion
3. Flame retardancy
4. Standard size and specification
5. impact resistance
6. Strong strength quality
Wind break wall Application:
Advantages:
Wind break dust suppression wall process:
1.Shear bending
2 Punching
3 Molding
4 Cleaning
5 Electrostatic spraying
Show our Wind break dust suppression wall pictures to you: