Sterility Test Pump Sterility Test kit biological products test pump

Introduction

The YT-601 collection instrument is a device used in conjunction with the disposable collection culture incubator. The sample is positively filtered and cultured in the incubator by the directional peristaltic pressure of the collection instrument to test the test sample. Whether it contains bacteria.

Features

• Stainless steel mirror body, small size and beautiful appearance;
• Color LCD display, friendly man-machine interface, simple and intuitive, easy to operate;
• Rotary coding switch for operation and parameter setting;
• Adopting brushless motor, high reliability, long life, no electrical contact spark, good safety and explosion-proof performance;
• Forced air cooling to ensure safe use of the product.

Applications

• Sterility examination of sterile preparations for injection (large infusions, maintenance fluids, biological products, powders, emulsions, etc.).
• Sterility tests for antibiotics and pharmaceuticals containing bacteriostatic ingredients.
• Sterility examination of sterilized medical devices (syringes, infusion sets, blood transfusion devices, intravenous catheters, etc.).
• For the examination of clinical body fluid bacteria, sterility inspection of drugs and biological products.

Installation

Unpacking and inspection

Open the box, remove the kit, the instrument and the spare parts and spare parts, and carefully check the contents of the box according to the packing list.

Power connection

Place the instrument on a stable workbench, plug the power cord into the power supply slot on the back of the instrument, and plug the other end into the power supply in the room.

(Note that the power supply voltage and frequency must match the instrument)

Installation method

Place the instrument on a stable operation table, install each accessory as shown in the structure diagram, and insert the power cord plug into the power supply that matches the instrument. After booting, see if it can run normally and effectively. Insert the foot switch cable connector into the socket that does not correspond to the bacteria collection instrument. If you need to remove it, disconnect the power supply and unplug it.