High Capacity Stone Impact Crusher Rock Crushing Machine Double Rotor

Hazemag Hammer Crusher Impact Stone Rock Crushing Machine Brief Introduction:

Stone Impact Crusher is also called as hammer crusher, it is the secondary crushing machine in the quarry production line. Current stone impact crusher is developed from Hazemag Hammer crusher in the very beginning. It is mainly used for metallurgical, chemical, building materials, hydropower and other materials that need to be relocated, especially for the operation of mobile materials such as highways, railways, hydropower projects, etc. The types, sizes and finished material requirements vary in a variety of configurations.

China's current mobile crushing stations are mostly used in construction waste treatment projects in urban demolition. The construction waste crushing and screening into several different sizes and regular recycled aggregates is the basis for realizing the recycling of construction waste resources in China.

White Lai Rotatory Impact Crusher Stone Impact Crushing Machine Models:

Hazemag Hammer Crusher Impact Stone Rock Crushing Machine Principle:

When the impact crusher works, the motor drives the rotor rotate of the impact crusher with high speed, on the rotor where installed the hammers. When the materials get into the area which the hammers affect, under the impact function of the hammer at a high speed, the materials are thrown to the impact device above the rotor continuously. Then the materials are rebounded from the impact liner to the area where the hammers effects for being re-crushed. The materials from large to small all to be crushed at the impact chamber repeatedly. The process won't stop till the material are crushed to the required size and then discharged from outlet of the impact crusher.

How To Maintain A Hazemag Hammer Crusher Impact Stone Rock Crushing Machine?

1. The impact crushing machine runs smoothly. When the vibration amount of the machine suddenly increases, it should stop immediately to find out the cause.

2. Under normal conditions, the temperature rise of the bearing should not exceed 35 degrees, and the maximum temperature should not exceed 70 degrees. If it exceeds 70 degrees, stop immediately and find out the cause.

3. When the hammer plate wear reaches the limit mark, it should be turned around or replaced in time.

4. After assembling or replacing the hammer plate, the rotor must be balanced and the static balance must not exceed 0.25 kg.m.

5. When the frame liner is worn, it should be replaced in time to avoid further worn of the casing.

6. Check the tightening status of all bolts before starting each time.

White Lai Stone Impact Crusher at Customer Sites Pictures: