MachineU > China Products > Electrical Equipment & Supplies > Electrical Supplies > Wall Switches
S5731S-H48T4XC-A Datacom Switches , Huawei 10g Sfp+ Switch Single Card Slot
S5731S-H48T4XC-A Datacom Switches , Huawei 10g Sfp+ Switch Single Card Slot
S5731S-H48T4XC-A Datacom Switches , Huawei 10g Sfp+ Switch Single Card Slot
S5731S-H48T4XC-A Datacom Switches , Huawei 10g Sfp+ Switch Single Card Slot
S5731S-H48T4XC-A Datacom Switches , Huawei 10g Sfp+ Switch Single Card Slot
S5731S-H48T4XC-A Datacom Switches , Huawei 10g Sfp+ Switch Single Card Slot
S5731S-H48T4XC-A Datacom Switches , Huawei 10g Sfp+ Switch Single Card Slot
S5731S-H48T4XC-A Datacom Switches , Huawei 10g Sfp+ Switch Single Card Slot
S5731S-H48T4XC-A Datacom Switches , Huawei 10g Sfp+ Switch Single Card Slot
S5731S-H48T4XC-A Datacom Switches , Huawei 10g Sfp+ Switch Single Card Slot
Specifications
Brand Name :
HUA WEI
Model Number :
Huawei switch S5731S-H48T4XC-A
MOQ :
1
Price :
$705.7362~1143.2927 Negotiable
Payment Terms :
T/T
Supply Ability :
100
product name :
network communication switch
Brand model number :
Huawei switch S5731S-H48T4XC-A
Number of ports :
24 Gigabit Ethernet ports
port type :
24Gigabit Ethernet ports 4 10 Gigabit SFP+
Description

S5731S-H48T4XC-A (02352YRF/02352YRF-003/02352YRF-005)

Version Mapping

Table 4-1450 lists the mapping between the S5731S-H48T4XC-A chassis and software versions.

Table 4-1450 Version mapping

Series

Model

Software Version
S5731S-H S5731S-H48T4XC-A

02352YRF: V200R019C00 and later versions

02352YRF-003: V200R020C10 and later versions

02352YRF-005: V200R021C10SPC600 and later versions (If V200R021C10SPC500 is used, install V200R021HP0121 or a later patch. If V200R021C00SPC100 is used, install V200R021SPH013 or a later patch.)

Appearance and Structure

Figure 4-563 S5731S-H48T4XC-A (02352YRF) appearance
Figure 4-564 S5731S-H48T4XC-A (02352YRF-003/02352YRF-005) appearance
1 Forty-eight 10/100/1000BASE-T ports 2

Four 10GE SFP+ ports

Applicable modules and cables:
3 One console port 4 One ETH management port
5 One USB port 6

One PNP button

NOTICE:

To restore the factory settings and reset the switch, hold down the button for at least 6 seconds.

To reset the switch, press the button.

Resetting the switch will cause service interruption. Exercise caution when you press the PNP button.
7

Ground screw

NOTE:
It is used with a ground cable.
 8

Rear card slot

NOTE:
Applicable card:
9

Fan module slot 1

NOTE:

Applicable fan module: FAN-023A-B (Fan box(B,FAN panel side exhaust))

 10

Fan module slot 2

NOTE:

Applicable fan module: FAN-023A-B (Fan box(B,FAN panel side exhaust))
11

Power module slot 1

NOTE:

Applicable power module:

 12

Power module slot 2

NOTE:

Applicable power module:

Port Description

10/100/1000BASE-T port

A 10/100/1000BASE-T Ethernet electrical port sends and receives service data at 10/100/1000 Mbit/s, and must use an Ethernet cable. Table 4-1451 describes the attributes of a 10/100/1000BASE-T Ethernet electrical port.
Table 4-1451 Attributes of a 10/100/1000BASE-T Ethernet electrical port

Attribute

Description
Connector type RJ45
Standards compliance IEEE802.3, IEEE802.3u, IEEE802.3ab
Working mode 10/100/1000 Mbit/s auto-sensing
Maximum transmission distance 100 m

10GE SFP+ optical port

A 10GE SFP+ Ethernet optical port supports auto-sensing to 1000 Mbit/s. It sends and receives service data at 1000 Mbit/s or 10 Gbit/s. Table 4-1452 describes the attributes of a 10GE SFP+ Ethernet optical port.
Table 4-1452 Attributes of a 10GE SFP+ port

Attribute

Description
Connector type LC/PC
Optical port attributes Depend on the optical module used
Standards compliance IEEE802.3ae
Working mode GE/10GE auto-sensing

Console port

The console port is connected to a console for on-site configuration. The port must use a console cable. The console port is used when a switch is powered on for the first time. For details about the attributes of a console port, see Table 4-1453.
Table 4-1453 Attributes of a console port

Attribute

Description
Connector type RJ45
Standards compliance RS-232
Working mode Duplex Universal Asynchronous Receiver/Transmitter (UART)
Baud rate

9600 bit/s, 19200 bit/s, 38400 bit/s, 57600 bit/s, or 115200 bit/s

Default value: 9600 bit/s

ETH management port

You can connect a switch to a configuration terminal or network management workstation through the ETH management port to configure the switch locally or remotely. The port must use an Ethernet cable. You can choose to download the software package through the ETH management port in the BootLoad menu. File transfer through the ETH management port is faster than transfer through the console port. Table 4-1454 describes the attributes of an ETH management port.
Table 4-1454 Attributes of an ETH management port

Attribute

Description
Connector type RJ45
Standards compliance IEEE802.3
Working Mode 10/100 Mbit/s auto-sensing
Maximum transmission distance 100 m
In V200R012C00 and later versions, you can log in to the switch that contains the ETH management port for the first time through the ETH port. For details, see "First Login to a Switch" in the Configuration Guide - Basic Configuration. If you have logged in to the switch for the first time by pressing and holding the MODE button for 6 seconds or longer and saved the configuration, the default configuration on the ETH port will be cleared. In this case, you cannot log in to the switch for the first time through the ETH port. You are advised to log in to the switch for the first time through the ETH port.

USB port

The USB port can have a USB flash drive connected to upgrade the switch, or transfer configuration files or other files. The USB port can only connect to a USB flash drive that complies with USB 2.0.

USB flash drives from different vendors differ in model compatibility and drivers. If a USB flash drive cannot be used, try to replace it with another one from a mainstream vendor. Switches support a maximum of 128 GB USB flash drives.

Indicator Description

The S5731S-H48T4XC-A has similar indicators to those on the S5731-H48P4XC except that the S5731S-H48T4XC-A does not have a PoE mode indicator. For details, see Indicator Description.

Power Supply Configuration

The switch can use a single power module or double power modules for 1+1 power redundancy. Pluggable AC and DC power modules can be used together in the same switch. However, the power modules with natural heat dissipation and the power modules with fan cannot be used at the same time.

Heat Dissipation

The S5731S-H48T4XC-A uses pluggable fan modules for forced air cooling. Air flows in from the front side and exhausts from the rear panel.

This figure only shows the airflow direction and does not depict the actual device.

Technical Specifications

Table 4-1455 lists technical specifications of the S5731S-H48T4XC-A.

Table 4-1455 Technical specifications

Item

Description
Memory (RAM) 4 GB
Flash 1 GB in total. To view the available flash memory size, run the display version command.
Mean time between failures (MTBF) 55.31 years
Mean time to repair (MTTR) 2 hours
Availability > 0.99999
Service port surge protection Common mode: ±6 kV
Power supply surge protection
  • Using AC power modules: ±6 kV in differential mode, ±6 kV in common mode
  • Using DC power modules: ±2 kV in differential mode, ±4 kV in common mode
Dimensions (H x W x D)
  • Basic dimensions (excluding the parts protruding from the body): 43.6 mm x 442.0 mm x 420.0 mm (1.72 in. x 17.4 in. x 16.5 in.)
  • Maximum dimensions (the depth is the distance from ports on the front panel to the handle on the rear panel): 43.6 mm x 442.0 mm x 448.0 mm (1.72 in. x 17.4 in. x 17.7 in.)
Weight (with packaging) 9.5 kg (20.94 lb)
Stack ports 10GE SFP+ ports on the front panel, or ports on the rear card
RTC Supported
RPS Not supported
PoE Not supported
Rated voltage range
  • AC input: 100 V AC to 240 V AC, 50/60 Hz
  • High-Voltage DC input: 240 V DC
  • DC input: -48 V DC to -60 V DC
Maximum voltage range
  • AC input: 90 V AC to 290 V AC, 45 Hz to 65 Hz
  • High-Voltage DC input: 190 V DC to 290 V DC
  • DC input: -38.4 V DC to -72 V DC
Maximum power consumption (100% throughput, full speed of fans) 124 W (without card)
Typical power consumption (30% of traffic load, tested according to ATIS standard) 101 W (without card)
Operating temperature
-5°C to +45°C (23°F to 113°F) at an altitude of 0-1800 m (0-5906 ft.)
NOTE:

When the altitude is 1800-5000 m (5906-16404 ft.), the highest operating temperature reduces by 1°C (1.8°F) every time the altitude increases by 220 m (722 ft.).

The switch cannot be started when the ambient temperature is lower than 0°C (32°F).
Storage temperature -40°C to +70°C (-40°F to +158°F)
Noise under normal temperature (27°C, sound power) < 57.5 dB(A)
Relative humidity 5% to 95%, noncondensing
Operating altitude 0-5000 m (0-16404 ft.)
Certification
  • EMC certification
  • Safety certification
  • Manufacturing certification
Part number

02352YRF

02352YRF-003

02352YRF-005

Notices:

1. Open the packaging, check the products carefully, and take them gently.
2. The product is a brand new original unopened equipment.
3. All products 3 year warranty, and the buyer is responsible for the return shipping cost.

International Buyers Please Note:
Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility.
Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying.
Customs fees are normally charged by the shipping company or collected when you pick the item up. These fees are not additional shipping charges.
We won't under-value merchandise or mark the item as a gift on customs forms. Doing that is against U.S. and international laws.
Customs delays are not the responsibility of the seller.
Inspur NF5270M6/NF5280M5/ NF2180M3/NP5570M5/NF3120M5/NF8480M5
Dell P5820/T7920/R250/R450/R540/R650/R650xs/R740/R750/R750xs
xfusion 2288HV5 2488HV5 5588HV5


Need to contact:
WeChat: +8613651169867
Skype: +8613651169867
WhatsApp: +8615732685076

Send your message to this supplier
Send Now

S5731S-H48T4XC-A Datacom Switches , Huawei 10g Sfp+ Switch Single Card Slot

Ask Latest Price
Product Detail
Brand Name :
HUA WEI
Model Number :
Huawei switch S5731S-H48T4XC-A
MOQ :
1
Price :
$705.7362~1143.2927 Negotiable
Payment Terms :
T/T
Supply Ability :
100
Contact Supplier
S5731S-H48T4XC-A Datacom Switches , Huawei 10g Sfp+ Switch Single Card Slot
S5731S-H48T4XC-A Datacom Switches , Huawei 10g Sfp+ Switch Single Card Slot
S5731S-H48T4XC-A Datacom Switches , Huawei 10g Sfp+ Switch Single Card Slot
S5731S-H48T4XC-A Datacom Switches , Huawei 10g Sfp+ Switch Single Card Slot
S5731S-H48T4XC-A Datacom Switches , Huawei 10g Sfp+ Switch Single Card Slot

Beijing Qianxing Jietong Technology Co., Ltd.

Verified Supplier
3 Years
beijing, beijing
Since 2019
Business Type :
Distributor/Wholesaler, Agent, Exporter, Trading Company, Seller, Other
Main Products :
Rack Storage Server, Huawei Fusion Server, Dell Poweredge Server
Total Annual :
7410000-8000000
Employee Number :
20~30
Certification Level :
Verified Supplier
Discover similar products
View More

Find Similar Products By Category:

Supplier Homepage Products Datacom Switches
MachineU China Products Electrical Equipment & Supplies Electrical Supplies Wall Switches
Contact Supplier
Submit Requirement