Main configuration & Features
FEATURES AT A GLANCE
Assembly Details
SN | Description | Parameter |
1 | Engine Model | Deutz V8 |
2 | RMP | 1500 / 1800 |
3 | Thermostat Opening Temperature | 79℃, 87℃,Full Opening temperature 94℃,102℃ |
4 | Engine Exhaust Temperature | 450-520℃ |
5 | Intake System | Turbocharged, intercooled |
6 | Cooling system | Forced Water Cooling |
7 | Combustion type | Lean burn, closed loop control |
8 | Sparking Mode | Electrical controlled single cylinder independent high-energy ignition |
9 | Lubricating System | Pressure splash lubrication |
10 | Engine Oil Temperature | ≤108℃ |
11 | Engine Oil Pressure | 70-85psi |
12 | Engine Oil Consumption | ≤0.3g/kWh |
1 | Model | ECO38-2LN4 |
2 | Power Factor | 0.8(lag) |
3 | Generating Efficiency | 94.1% |
4 | Generator Capacity | 300kVA/350kVA |
5 | Phase | Three Phase Four Wire |
6 | Insulation Grade | H |
7 | Protection Grade | IP23 |
1 | Model | DEIF AGC222 Series |
2 | Functions | One button start/stop, Data Display & Recording, Monitoring, Protection |
3 | Display | Rmp/water temperature/running hours/current/ voltage/active power/ wattless power/allocation proportion etc |
4 | Protection | High temperature, low lubricant pressure, over speed, overcurrent, voltage abnormal, short circuit control and alarming |
Project in Oil & Gas