TY180 Hydraulic Puller

• The machine allows for the tension stringing of 4-bundle conductor of 630mm2 and below in mountainous and hilly areas, and of 4-bundle conductor of 720mm2 and below in flat lands;
• Besides, it can be used for traction stringing of OPGW or ADSS optical cable and 500kV traction stringing in various terrains, suitable for use at altitudes up to 1500 meters above sea level.

Performance

Max pull

190kN

Max continuous pull

180kN

Speed at max pull

2.5km/h

Max speed

6km/h

Pull at max speed

75kN

Characteristics

Bull-wheel diameter

750mm

Groove number

10

Max rope diameter

28mm

Max diameter of rope reel

1400mm

Total weight

6700kg

Overall dimension (length*width*height)

5000x2300x2500mm

Engine

Diesel

325hp Euro III, 4-stroke cycle, turbo-charged

Cooling system

liquid

Electrical system

24V

Main configuration

Engine

Cummins

Hydraulic pump

German Rexroth

Main motor

German Rexroth

Speed reducer

German Rexroth

Tail bracket hoisting motor

American Eton

Hydraulic meter

German

Operating handle

German Rexroth

Hydraulic Transmission

• Closed hydraulic circuit for step less speed variation in both rotating directions. This machine is provided with a pull pro-setting system that maintains the pre-set pulling value (also when the speed is reduced to "0") by automatically adjusting the operation speed according to the friction and unexpected loads which may occur.

Configuration

• Hydraulic dynamometer with set-point and automatic control of maximum pull
• Hydraulic oil cooling system
• Control instruments for hydraulic system and diesel engine
• On board reel winder with automatic level wind, suitable for standard reel mod. 1100 and 1400
• Hydraulic front stabilizer, Grounding connection point

Additional Devices

• Lighting system for the trailer
• Hydraulic rope clamp for reel change
• Swivel guide rope roller
• Trailer for towing at max speed of 30 km/h
• Extra shaft
• Digital speed and meter counter (extra charge)

Additional Devices

• The chassis provided with Brake, back lights and mudguard, with a single point lift to allow lifting with a crane.
• Cable and radio remote control fully replacing all controls at machine panel.
• Remote diagnosis via GSM network with GPS modem, Synchronization system
• Hydraulic system for drum stand control with flat face quick action couplings
• Auxiliary Hydraulic system (700/1000 bar) for power pressing tool
• Lockable toolbox, Holding fixture for hose kit, Grounding plate, Acoustic insulation
• Biodegradable hydraulic oil, Allowable tension indictor, Overload tension alarm, First Aid Kit
• Manufacturer's workshop maintenance manual, in English
• Manufacturer's recommended tools.
• Manufacturer's routine spares for five years' duty (filters, bulbs, etc.).