Hat Roll Forming Machine Solar Racks Steel Sheets 1.1mm - 2.5mm

C steel forming machine rolling C type purling finished product has good flexural compressive properties, and the straightness is good, completely automatic fixed-length cutting, automatic punching, high degree of automation, fast and convenient installation. Products can be used for the main body of large and medium-sized industrial and civil construction stress structure, such as factories, warehouses, engine garages, hangar, exhibition halls, theaters, sports venues, the shed roof bearing load and metope bearing of market garden.
This machine is mainly composed of passive feeding outfit, feeding outfit chassis, feeding import platform, leveling device, molding main engine, punching device, molding cutting device, hydraulic station and computer control cabinet.

Working flow

Decoiler → Feeding Guide → Roll Forming → Cut-to-length → Run out table

Components for hot selling roll forming machine:

Details of each composition

A De-coiler

1. Single unrolling machine, one side can put material.

2. Adopt automatic hydraulic system.

3. Coil weight (Max):10000kg.

4. Inter diameter: 470mm-520mm.

5. Maximal out diameter:1800mm.

6. Oil cylinder dia:120mm working pressure: 20mpa (=20Tons).

7. Coil width (Max.):1000mm.

8. Working speed: 0-25m/min.

9. Power: 5.5KW.

10. Hydraulic power: 3kw.

11. De-coiler should be with Loop control and hold down.

12. Coil car: 10Tons.

13. The motor power of coil car: 3Kw.

14. Pressure: 12Mpa.

B Roll forming main machine

1. Coil width: 1000mm effective width:930+3-3 mm (design base on 3mm).

2. Working speed: 0-20m/min (not contain cutting and punching).

3. Roll station: 17stations material of roller: Gcr15 bearing material; polished and coated with chrome HRC58-62°.

4. Material of main shaft: 45 forge steel(Same as SAE1045) diameter roller: 150mm.

5. Main power: 45kw, forming thickness: 2.5mm—3.5mm, Transmission: by chain.

6. Roll former has leveling bolts in the base.

C Cutting

1. Machine adopt hydraulic cutting.

2. Cutting after forming: Cut the sheet after roll forming to required length.

3. Cutting motion: The main machine automatically stops and the cutting will take place. After the cutting, the main machine will automatically start.

4. Material of blade: CR12with heat treatment .

5. Length measuring: Automatic length measuring .

6. Tolerance of length: 4700mm+/- 2mm.

D Control panel

1Voltage, Frequency, Phase: 380 V, 50 Hz, 3Phase

2.Automatic length measurement.

3.Automatic quantity measurement.

4.Computer used to control length & quantity. Machine will automatically cut to length and stop when required quantity is achieved .

5.Length inaccuracy can be amended easily.

6.Control panel: Button-type switch and touch screen.

7.Unit of length: millimeter (switched on the control panel).

8. Laguage: English, Spanish and Chinese.

Machine Pictures: