Fully Automatic 100~700 Cbm Per Day Particle Board Multi Opening Press Production Line

Description

the only machine that gives the possibility to different working parameters setting for any single working daylight. WORKING CYCLE START When the working cycle staits, the machine carries out its setting: all working daylights are set in pressure and the pressing unit positioned at the height of the first opening to be loaded. The mobile structure vertical movement is controlled by a rack and pinion system along with a special compensating device granting, in this way, a perfect parallel movement. Electronic systems working on the four sides of the platens manage independently the lifting cylinders for a perfect alignment of the platen to the loading unit. Meanwhile the lifting operation is carried out, the opening of the movable upper platen is done.

The 110~500 cbm/day PB production line has automatic operation system, reasonable technical process, stable running. It can produce 4 x 8, 6 x 8, 6 x 9,6 x12 sized PB. This production line uses the waste of wood process factory and branches of wood as raw material, after chipping, flaking, drying, sifting, hot-press, sanding and cutting to produce particle board. The particle board can be used for furniture, building construction, package, inner decoration of vehicle and ship, and short-cycle over-laying particle board for decoration.

Summary of process flow

• Chips and Flakers Preparation Section
• Drying and Sifting Section
• Glue Dosing System
• Forming and Hot-Pressing Section
• Cooling and Sawing Section
• Sanding Section

Main economic and technical data

Main characteristics of particle board production line

• Good adaptation of raw material: Small wood-log, branches, residue of the wood processing, can be used as raw material for particle board.
• Lower glue consumption: The electrical measuring and adjusting of the ratio between various materials and glue, the proportion between the flakes and the glue can be controlled by computer system on line. High pressure glue injection, can ensure the glue mist very well, which is good for glue blending and lower the glue applying consumption.
• Homogeneous structure of mat: The forming machine adopts the advanced mechanical classic-forming, with special diamond roller, to ensure ideal spreading, improve the board quality in the end.
• Hot-pressing system: Adopting multi-opening press, ensure the press closing synchronal by both mechanical and hydraulic methods. The board thickness tolerance is less, in order to reduce sanding amount.
• High efficiency automatic control: The whole electrical control system of the production line adopts world advanced electrical elements, the control system work reliably and stably.

Key equipment of production line

• Drum chipper

• Knife-ring flaker

• Dryer

• Screen and Sifter

• Forming station

• Hot press

• Sanding machine