Particle’s Oscillating Screen for Paticle Board Production Line Screen Area 18㎡

Particle’s Oscillating Screen for Paticle Board Production Line

Description

The material is fed evenly into the feed hopper of the screening machine or gyratory screen with the aid of a dosing system, conveyor belt or the like. In the feed area, the material to be screened is spread out on its way to the screening area. Through the rapid and orbital oscillations, the loaded material is kept constantly in motion as it flows over the screen surface in the direction of the discharge area.

Oscillating screening machine
The orbital movement of the screen causes the material to distribute itself horizontally over the surface, so that it is almost impossible for long thin pieces to stand upright on the screen or drop through it. The material to be screened, which is smaller than the apertures in the screen elements, falls through. From there, it moves on to the next screening stage, if required. This procedure is repeated until the material has been completely screened. The screened material is then discharged through the corresponding discharge outlets.

Oscillating Screen is used for seperating particles after drying to different silo based on different size. Generally there are four paths for particles after the osillating screen. First is the dust for boiler. Second is for surface layer of particle board with small size. Third is for core layer of particle board with big size. And the last is the oversize particle which will be crushed again.

Main characteristics of oscillating screen

• Large unit capacity based on large amplitude vibration.
• Stable running based on patent frame design.
• Long life of elastic support.
• New technology to control the motion balance.
• Lower space requirement.

Main technical data