In-Line Tunnel Oven SHR-01G Series Rail Conveyor

Adopt wear-resistant guide rail, strong and durable, high interchangeability.

The width of guide rail can be adjusted to meet a variety of product sizes.

Stainless steel chain with guard, anti-jam design, practical and reliable.

Optional multi rails transmission to meet different process requirements.

Full modular design, convenient maintenance, reduce maintenance time and cost.

Patented hot air system, more efficient hot air convection conduction, faster heat compensation.

New furnace structure design, multi-layer heat insulation, effectively reduce the working environment temperature.

Features:

• Stage temperature control, to adapt to the process requirements of different products, PID temperature control, with good furnace temperature uniformity and better curing quality;
• Hot air circulation, high thermal efficiency, the total power is small, saving more than 25% power than the traditional equipment;
• Special heat insulation structure, the surface temperature of the machine housing is close to the room temperature, reduce energy;
• Modular design, flexible configuration, can meet various process requirements, especially for the products require for long baking;
• It can be used with automatic production line to effectively control manpower, reduce handling, reduce defects, save time and save input cost.

Application range:

• It is suitable for curing products without the requirement of process edge or bottom space;
• The rail width can be adjusted to meet the diversity of product specifications;
• Suitable for curing and baking process of PCB, LED, Mini LED, capacitor, power supply and other components. It covers electronic products, automotive electronics, semiconductors, 3C products, etc.

Overall diagram:

01 Monitor

02 Exhaust system

03 Chamber lifting unit

04 Heating module

05 Bottom chamber module

06 Top chamber module

07 Conveyor system

08 Conveyor motor

Options:

• Cooling system

1. Pressure charged air cooling

2. Water chiller

• Nitrogen system
• MES interface
• Temperature profile interface
• Buffering system

1. Multi-channel buffer

2. With shifting connection

• Preheating system

The preheating length can be customized.

• Conveyor system

1. Conveying width can be 500mm, 850mm, or to be customized

2. Multi-channel design

• Rack

1.Reserve the installation position for the fixture

• Customized conveying rails

The guide rail conveying mode can be customized according to the product process requirements.

Product Parameters:

Notices:

1.Power requirements:

①Three phase five wire: voltage 380V, frequency 50/60HZ;

②The wire diameter requirement is 16mm² or more, with a leakage protection switch of 125A and a leakage capacity of 150-200mA.

2.The ground is required to withstand a pressure of 1000kg/m².

3.External ventilation requirements: Duct specification 2-Ø150mm; Two exhaust ports, with a single exhaust port having an exhaust volume of approximately 15M³/min.