Juice Milk Tea Bottle 250ml Aseptic Cold Filling Machine

Overview:

SUNRISE offers a variety of sterilization technologies for any PET preform, PET/HDPE bottle and/or closure, and a wide range of volumetric electronic fillers that meet stringent hygiene requirements.

The filling of sensitive beverages demands high levels of hygiene and safety. SUNRISE’s blow and fill technologies ensure optimal container sterility and that the filling and capping process prevents microbiological contamination, keeping beverages safe and stable.

The filling process is appropriate for any kind of sensitive drink, including high and low acid varieties, those with and without pulp, fibers, or pieces, and both still and carbonated beverages. SUNRISE aseptic fillers meet critical environmental control requirements and achieve high levels of performance in terms of filling speed, accuracy, and flexibility.

The complete bottle ’neck handling’ system enables very quick changeovers for any container with the same neck design. The internal cleaning (CIP) and sterilization (SIP) cycles are performed with a completely automatic cup insertion and extraction for closed-loop and optimized process.

Specifications

Aseptic packaging technology was born in the 1930s, PET aseptic cold filling production line using aseptic space for sterilization, to ensure that the entire filling process to meet the requirements of asepsis.

Aseptic cold filling refers to the cold (room temperature) filling of products under aseptic conditions, as opposed to the high temperature hot filling method which is usually used under normal conditions. Under the condition of aseptic filling, the device may cause microbial contamination of the product parts are keeping asepsis condition, Therefore, there is no need to add preservatives in the products, and there is no need to sterilize the products after filling and sealing, which can meet the requirements of a long shelf life, while maintaining the taste, color and flavor of the products.

The key of aseptic cold filling technology is to ensure that the microorganism in the product after filling and sealing is controlled within the allowable range (i.e. commercial asepsis). In order to ensure the success of aseptic cold filling, the production line must meet the following basic requirements: the product is immediately sterilized at ultra-high temperature to reach the aseptic state; Packaging materials and sealed containers should be aseptic; Filling equipment to achieve sterile state; Filling and capping should be carried out in a sterile environment; Establish, monitor, record and control of the critical control points.