Ultra Low Carbon Austenitic Stainless Steel Pipe Incoloy 028 1.4563 / Sanicro28
Incoloy 028 / UNS N08028 Ultra-low carbon austenitic alloy Stainless Steel tube 1.4563 / sanicro28
Incoloy 028 / UNS N08028 Corrosion resistance: It has good uniform corrosion resistance in some severe corrosive environments. It is better than 904L in H2SO4, close to Hastelloy G, and has good performance in H3PO4. It is better than HCl, HF and HNO3 in general. Stainless steel is excellent. Because of its extremely low carbon content, it has good resistance to intergranular corrosion. After repeated welding, the corrosion resistance does not decrease, and the crevice corrosion resistance is also good.
Description:
Incoloy 028 / sanicro28 / 1.4563 / UNS N08028 Ultra-low carbon austenitic alloy Stainless Steel Pipe or Tube
Material: Incoloy 028 / sanicro28 / 1.4563 / UNS N08028 / Alloy28
Main chemical composition:
C:≤0.02 | Si:≤1.00 | Mn:≤2.0 | P:≤0.02 | S:≤0.015 |
Ni:31 | Cr:27 | Mo:3.5 | Fe:Balance | Cu:1.00 |
Size Range for tubing:
OD:1/4" (6.25mm) to 8" (203mm) |
WT 0.02" (0.5mm) to 0.5"(12mm) |
Length:15m(Max) or as your requirement |
Inspection and Test Procedure
1. 100% PMI,Spectro Chemical Aanlysis Test for Raw Material
2. 100% Dimension & Visual Examination
3. Mechanical Properties Test Include Tension Test,Flaring Test (For Seamless tube/pipe)/ Flange Test (For Welded Pipe & Tube), Hardness Test ,Reversed Flattening Test
4. 100% Hydrostatic Test or 100% NON-DESTRUCTIVE Test (ET or UT)
5. Radiographic Test for Welded Pipe (shall be accordance with specification,or shall be as agreed upon between the purchaser and vendor)
6. Straightness Test (optional)
7. Roughness Test (optional)
8. Intergranular Corrosion Test(optional)
9. Impact Test (optional)
10. Grain Size Determinations (optional)
NOTES : ALL THE TESTS AND INSPECTION RESULT NEED TO BE SHOWED IN REPORTS ACCORDING TO STANDARD AND SPECIFICATION.