High Density Push Back Pallet Rack With Multi Deep Corrosion Protection

Push Back Pallet Rack Key Benefits:

1. High densities - three and four deep systems are common, which allows blocks of 6 or 8 deep, with back to back rows. Depths of up to 6 deep are also available, at higher costs.

2. Improved selectivity over Drive-In, which Push-Back often replaces.

3. Efficiency vs. Drive-In - trucks do not need to drive into rack loads come to them at the pick face.

4. Less rack. Truck and product damage vs. Drive-In- with no trucks driving inside rack.

Push Back Pallet Rack Advantages:

Over Single Selective Racking

1. In a typical three deep, back to back Push Back system, space savings would amount to around 40% vs. Single Selective Rack.

2. Converting an existing space from Single Selective to Push Back would accommodate an increase of about 60% in pallets stored.

3. Over-head Push-Back (loaded and unloaded from replenishment aisle in rear) ensures optimal use of vertical space above floor level Pallet Flow picking system.

How to Use Push Back Pallet Rack

1. Put the goods on cart from the front and push in.
2. Goods stored later will put the former goods forward, carts connected together.
3. When the front goods are taken away, inside cart will slide down automatically.

Dehumidifier Features

• First-in-last-out mode

• Large storage capacity and extremely high space utilization

• Suitable for multiple varieties and large quantities of goods

• Suitable for situations such as freezer that need to greatly improve space utilization

1. When the number of pallets of a certain product is large and “first in, first out” is not required, the working procedure can be simplified and the benefits are extremely significant;
2. It can shorten the picking time, no special handling equipment required;
3. Due to the large storage area and fewer channels, space utilization and productivity are high;
4. It can avoid high-density storage shelves often caused by cargo damage during loading and unloading operations.

Product detail

Cart - Bearings – Rails – Anti-Slip Steel – Rail Bracket – Front Stopper

Design Features

The track of the press-in rack has a certain slope, about 3 °. It uses the weight of the goods, and the pallet goods are specified for single-end storage. The total depth of this kind of rack should not be too deep, generally within the depth of 6 pallets, because the carts are embedded in each other, so they take up some space. The weight of a single pallet is generally within 1500kg, and the rack height is generally below 6m.