Solar SPD 1000V Surge Protector DC 40kA Power Transient Voltage Suppression
Solar SPD 1000V Surge Protector Characteristic:
• Ucpv: 1000 V dc.
• Mounting: Din rail 35mm.
• Optional remote signaling.
• Visual end of life indicators.
• Type 2 over voltage protection.
• Nominal discharge current (8/20μs): 20 kA.
• Maximum discharge current (8/20μs): 40 kA.
• I/O Connections: Multi core wire: 4-25mm2.
• Protection mode: +/----PE, -/+---PE, +/---- -/+.
• It is well tested and certified by the IEC 61643-31 standards.
• The core parts are metal oxide varistor components with high discharge capacity.
• Plug-in format, surge protection device is consisting of a base part and 3 plug-in high energy MOV protection modules.
Solar SPD 1000V Surge Protector Product detail:
3 Mod | BRPV3-1000 |
SPD classification according to EN61643-31 | Type 2 |
SPD classification according to IEC61643-31 | Class II |
Max. continuous operating dc voltage Ucpv | 1000V |
Nominal discharge current (8/20us) In | 20kA |
Max. discharge current (8/20us) Imax | 40kA |
Voltage protection level [(DC+/DC-)→PE] Up | ≤4.0kV |
Response time tA | ≤25ns |
Operating temperature range Tu | -40℃-80℃ |
Operating state / fault indication | green / red |
Cross-section area (Min.) | 4mm2 |
Cross-section area (Max.) | 35mm2 |
For mounting on | 35mm Din rail |
Enclosure material | Thermoplastic UL94-V0 |
Degree of protection | IP20 |
Dimension:

Solar SPD 1000V Surge Protector Application:
• Applied for the protection of photovoltaic devices.
• Protect against lightning surge voltage in solar system (photovoltaic power supply system).
• Suitable for all PV applications: large-scale, rooftop and self-consumption (off-grid) DC installations.
• Protect the solar equipment like solar panels and solar inverter from surges damage or overvoltage.
Advantage:
• Easy to be replace with pluggable design.
• 2 years warranty.
Noted:
• These units must be installed in parallel on the DC networks to be protected and provide common and different modes protection. Its installed location is recommended at both ends of the DC power supply line (solar panel side and inverter/converter side).
• If possible, the connection between the external Solar PV Array and the internal power control equipment should be underground or electrically shielded to limit the risk of direct lightning strikes.
Certification:

Shipping:
According to customer's requirement, we usually shipping the product by express, air and sea also optional.

FAQ:
Q1: What is the MOQ order for your product?
A: 100pcs.
Q2: Do you supply OEM service?
A: Sure.
Q3: Can I get a lower price if I make the large order?
A: Of course! Cheaper prices with larger order.
Q4: What is the delivery date?
A: Generally delivery within 30 working days after receipt of payment, if urgent need, time can be shortened.