MachineU > China Products > Electrical Equipment & Supplies > Low Voltage Products > Surge Protection Device
Dinrail 10kA Type 3 Spd Surge Protector Three Phase Remote Lightning Proof
Dinrail 10kA Type 3 Spd Surge Protector Three Phase Remote Lightning Proof
Dinrail 10kA Type 3 Spd Surge Protector Three Phase Remote Lightning Proof
Dinrail 10kA Type 3 Spd Surge Protector Three Phase Remote Lightning Proof
Specifications
Brand Name :
BRITEC
Model Number :
BR-10DP 3P+NPE
Certification :
CE
Place of Origin :
China
MOQ :
200 piece / pieces
Payment Terms :
T/T
Supply Ability :
50000 pieces per month
Delivery Time :
15-30 days after payment
Packaging Details :
EXPORT PACKING
Item :
Surge protective device
Type :
Class III
Test standards :
IEC 61643-11 / EN61643-11
Un :
24V / 60V / 120V / 230V
In :
5kA
Uoc :
10kV
Material :
Thermal plastic UL94-V0
Response Time :
≤25ns
Mounting on :
35mm Din rail
Warranty :
2 years
Description


Class III Type 3 Surge Protective Devices 10kA MOV SPD Three Phase Remote & Non Remote

Class III Type 3 Surge Protective Devices 10kA MOV SPD Feature:
• Type 3 surge protective devices shall be installed as close as possible from the sensitive equipment to protect.
• The BR-10DP series of modular surge protection devices provides protection of equipment connected to incoming low voltage AC power supplies against the damaging effects of transient over voltages caused by local lightning strikes, or the switching of electrical inductive or capacitive loads.
• Tested with a 1.2/50 - 8/20 current combination wave generator, they ensure a very low protection level voltage value.


Class III Type 3 Surge Protective Devices 10kA MOV SPD Product Details:

BR30-10DP 3+1BR75-10DP 3+1BR150-10DP 3+1BR275-10DP 3+1
SPD classification according to EN61643-11Type 3Type 3Type 3Type 3
SPD classification according to IEC61643-11 Class IIIClass IIIClass IIIClass III
Nominal a.c. voltage Un24V60V120V230V
Max. continuous operating a.c. voltage Uc30V75V150V275V
Max. continuous operating d.c. voltage Uc38V100V190V300V
Nominal discharge current (8/20us) In5kA5kA5kA5kA
Combined impulse Uoc10kV10kV10kV10kV
Voltage protection level Up≤200V≤500V≤700V≤1100V
Response time tA≤25ns≤25ns≤25ns≤25ns
Operating temperature range Tu-40℃-80℃-40℃-80℃-40℃-80℃-40℃-80℃
Operating state / fault indicationgreen / redgreen / redgreen / redgreen / red
Cross-section area (Min.)2.5mm22.5mm22.5mm22.5mm2
Cross-section area (Max.)16mm216mm216mm216mm2
For mounting on35mm Din rail
Enclosure materialThermal plastic UL94-V0
Degree of protectionIP20IP20IP20IP20


Dimension:

Dinrail 10kA Type 3 Spd Surge Protector Three Phase Remote Lightning Proof

Class III Type 3 Surge Protective Devices 10kA MOV SPD Main benefits:
• Extremely low level of protection voltage value that is suitable for all sensitive terminal equipment.
• Connection bases can be supplied either with, or without, additional remote indication facility
• Good value of Imax 10kA
• The BR-10DP series offers DIN rail mount connection bases
• Common and differential mode of protection
Class III Type 3 Surge Protective Devices 10kA MOV SPD Application:
• Type 3 would be fitted to a final circuit or at an item of equipment to protect locally against switching overvoltages
• It must therefore mandatorily be installed as a supplement to Type 2 SPD and in the vicinity of sensitive loads.


Our Services:

• 17 years global leading profession manufacture of electrical products surge arrester.
• All products will be well packed before shipping.
• Standard packaging, and you can also tell us your own requirements on packaging.
• Faster delivery.
• Individually Tested Prior to Shipment.


Noted:

• Type 3 surge protective devices are generally installed right in front of the terminal device to be protected.
• Effective surge protection is not just simply installed. It has to be individually coordinated – to the system that is to be protected and the ambient conditions that are prevalent on site. For this reason, the design and concept must be consistent. This means many details must be taken into account, from considering the standards and stipulations right through to classification according to lightning protection zone.
• Surge protection should ensure that surge voltages cannot cause damage to installations, equipment or end devices.


Certification:

Dinrail 10kA Type 3 Spd Surge Protector Three Phase Remote Lightning Proof

Our factory:

Wenzhou Britec Electric Co., Ltd. an export enterprise specialized in the manufacture of SPDs, our factory was found in 2003. Which is located in Yueqing city, Zhejiang province, China.

Dinrail 10kA Type 3 Spd Surge Protector Three Phase Remote Lightning Proof

FAQ:

Q1. Payment:
A: TT 30% deposit in advance and the balance before shipping.

Q2. Delivery time and methord:
A: Usually within 30 days.

Q3. Port of loading:
A: Shanghai or Ningbo port, China.

Q4. MOQ:
A: 100PCS.

Q5. Package:
A: Standard export packing--Carton.






































Product tags

spd surge protector

,

lightning proof surge protector

,

lightning surge protector for electrical panel
Send your message to this supplier
Send Now

Dinrail 10kA Type 3 Spd Surge Protector Three Phase Remote Lightning Proof

Ask Latest Price
Product Detail
Brand Name :
BRITEC
Model Number :
BR-10DP 3P+NPE
Certification :
CE
Place of Origin :
China
MOQ :
200 piece / pieces
Payment Terms :
T/T
Contact Supplier
Dinrail 10kA Type 3 Spd Surge Protector Three Phase Remote Lightning Proof
Dinrail 10kA Type 3 Spd Surge Protector Three Phase Remote Lightning Proof

Britec Electric Co., Ltd.

Verified Supplier
7 Years
zhejiang
Since 2003
Business Type :
Manufacturer, Importer, Exporter, Trading Company, Seller
Main Products :
Surge Protection Device, Type 1 Surge Protection Device, Type 2 Surge Protection Device
Certification Level :
Verified Supplier
Discover similar products
View More
Watch related videos

Find Similar Products By Category:

Supplier Homepage Products Surge Protective Device Type 3
MachineU China Products Electrical Equipment & Supplies Low Voltage Products Surge Protection Device
Contact Supplier
Submit Requirement