RJ45 SPD Ethernet Signal Surge Protector RJ45 ethernet surge protection devices
Ethernet Signal Surge Protector RJ45:
● BR-RJ45 series of SPDs is mainly used for Ethernet 100 Base-T/Tx,100Vg-Any-Lan,CDDI,Token Ring(IEEE 802.5).
● Low limiting voltage and quick response.
● Protect network system equipment from inductive lightning wave, surge voltage, electrostatic interference, poor
grounding.
● Insertion loss:≤0.3dB.
● Conform to IEC61643-21.
Ethernet Signal Surge Protector RJ45 Product Details:
BRRJ45L-4L | |
Test standards | IEC61643-21 |
Nominal voltage Un | 5V |
Max.continuous operating d.c.voltage Uc | 6V |
Max.continuous operating a.c.voltage Uc | 4V |
Nominal current IL | 0.5A |
C2 Nominal discharge current (8/20us) per line In | 5kA |
Voltage protection level [line-line] Up | ≤30V |
Voltage protection level [line-PG] Up | ≤500V |
Response time [line-line] tA | ≤1ns |
Response time [line-PG] tA | ≤100ns |
Operating temperature range Tu | -40℃…+80℃ |
Connection (input/output) | RJ45 socket 4 line |
Data rates | 100 Mbps |
Insertion Loss | ≤0.3dB |
Enclosure material | aluminium alloy |
Degree of protection | IP20 |
Ethernet Signal Surge Protector RJ45 Dimension:
Application:
● Protect network devices powered from Ethernet such as webcams.
● Protect against include direct lightning strikes, voltage spikes, or POE overvoltage.
● Protects both transmission and power circuits from lightning surges on POE compatible devices.
● Protect PSE (power-supply equipment) connected to a network from transient overvoltage.
● Inserted inline on an RJ45 CAT6/CAT5/CAT5e cable to prevent damage of electronic networking equipment.
● Protect communication devices connected via Ethernet LAN from lightning surge entering through network cables.
● Protect a wide array of valuable components such as switch, router, modem, bridge, repeater, or any part of
internet service network.
Q1: Are you a trade company or a manufacturer?
A: We are the manufacturer and we are specialized in low voltage surge protection field.
Q2: What is your delivery date?
A: Sample Order: 7-15 days after receipt of the full payment; Mass Order: 15-20days after receipt of the full payment; OEM Order: 15-30days after receipt of the deposit.
Q3: What is your payment terms?
A: Paypel, TT, L/C ect.
Q4: Can you send samples?
A: Yes, every time you need, please contact us directly.