Product Round-trip Machine Load Measurement Of GPS Site Survey Equipment
Data export | √ |
Car charger | √ |
Lighting /Currency detection | √ |
- Round-trip machine load is used to measure the area of agricultural machinery back and forth work,put the Land meter in the middle of the vehicle width as far as possible,set the width of the front-end operation of agricultural machinery,and then carry out back and forth work measurement.
- At the Round-trip machine load in parameter setting,press the ▲▼button to set the width.
- After setting is completed,press the power-off to return main interface.
- Press the▲▼button switch function to“Round-trip machine load”in the main interface;
- Press【Start】button at the starting point to start the measurement at the beginning of the work.
- Press the【Stop】button to pause measurement and view data after agricultural machinery work is completed;If the measurement is not completed,press the 【Start】 button again to continue the measurement. If the measurement is completed,press power-off to save the data.







GPS Site Survey Equipment |