Handheld Survey Equipment USB GPS Navigation GPS Site Survey Equipment

Length&Width Measurement Of GPS Site Survey Equipment:

① In the main interface,press the ▲▼to switching function to “Length and width”.

② At the starting point A press the【Start】button to measure,and press the【Enter】button to save the point A,go to the inflection point B, and press the【Enter】button to save the point B,go to the inflection point C,press the【Enter】button to save point C.

③ Press the【Stop】button to end measurement and view data,and press "Stop" to save the data.

Mountain Area Measurement Of ​GPS Site Survey Equipment:

① In the main interface,press the ▲▼to switching function to “Mountain”.

② Press the 【Start】button to measure at the top of the mountain,and press the 【Enter】 button to confirm the information.

③ Press the【Enter】button and proceed from the foot of the mountain,walk around the foot of the mountain,and back to the starting point, press the【Enter】button,then press the【Stop】button to end measure and view data；

④ press "Stop" to save the data.

In the measurement interface,three letters A,B and C will be displayed next to "Mountain" above the screen.

A represents the location information of the mountain top collected.

B represents the starting point at the foot of the mountain.

C represents to go around the foot of the mountain from the starting point and then back to the starting point.

Fixed Point Area Measurement Of GPS Site Survey Equipment:

① In the main interface,press the ▲▼to switching function to“Fixed point”.

② At the land starting point,press the【Start】button to start measuring,and press the 【Enter】 button to confirm the information of the starting point.

③ Walk along the edge of the land,press the 【Enter】button at each inflection point to collect the information of each inflection point；

④ After collecting the information of the last inflection point (not coinciding with the starting point),press【Stop】button to pause the measurement and view the data.

⑤ If the measurement is not completed,press the【Start】button again to continue the measurement. If the measurement is completed,press "Stop" to save the data.

Note:

When using the fixed point function,two words of “fixed point ”will be displayed at the measurement interface.

When using the area measurement function,the measurement area icon will be displayed on the left side of the measurement interface.

When using the fixed width function,the words on the right side of the measurement interface represent the number of points collected.