GPS Land Meter Agriculture Measurement GPS Land Survey Equipment

Measurement preparation of GPS land survey equipment:

The first step

In an open area outside ,press the Start button for 2 seconds to enter into the home surface of the land meter;

The second step

Search satellite after start up,there will be voice prompt,the text on the screen indicates the status of the signal and the value of HDOP. It is recommended that the HDOP value below 1.0 start measuring.

The third step

After the HDOP value is below 1.0 ,press the▲▼button to choose measurement function,and start to measure according to the demand.At last,press the【Start/Stop】button to the measurement surface.

Normal area measurement,L/W area measurement

Using range:all flat terrain

1. At the starting point(Start at any point),press the【Start/Stop】button to measure in the main surface;

2. Return to the starting point in a circle around the ground,press the【stop】 button to pause the measurement and view the measurement data.

3. Press the start button to end measurement and save data.

Using range:The measured terrain should be a regular rectangle

①At the starting point A,press the【Start/Stop】button to measure,and press the【Enter】button to save point A information;

②Going from point A to point B,press the【Enter】button to save point B information ;Then going from point B to point C,press the【Enter】button to save point C information ;At last,press the【Start/Stop】button to view the measurement data;

③Press the start button to end measurement and save data.

Normal distance measurement

Using range:all flat terrain

①At the starting point(Start at any point),press the【Start/Stop】button for 3 seconds to measure in the main surface;Press the【Start/Stop】button at the ending point and end the measurement to view the measurement data;

②Press the start button to end measurement and save data.