Handheld GPS Land Meter Land Area Length Measurement GPS Measuring Tool

Altitude choose of GPS measuring tool:

①On the home page of boot,press the 【Settings】button to enter the settings interface；

②Press the▲▼button move to“System setting”；Press the【Enter】button to enter；

③Press the【Enter】button to the altitude;

④Press ▲▼ button to choose GPS or barometer;

⑤After finishing setting,press the start button to exit.

Note: if you choose the barometer, you need to calibrate the height. The measurement is more accurate after calibration.

• Altitude calibration:

①On the home page of boot,press the 【Settings】button to enter the settings interface；

②Press the▲▼button move to“Altitude calibration”；Press the【Enter】button to enter；

③Press ▲▼ button to adjust the value of number；

④After finishing setting,press the start button to exit.

• Data record

• Statistics record

①On the home page of boot,press the 【Settings】button to enter the settings interface；

②Press the▲▼button move to“Data record”；Press the【Enter】button to enter；

③Press ▲▼ button to “Statistics record”,then press the【Enter】button to enter；

④Press ▲▼ to choose area or distance in the data record interface;

⑤Press 【Enter】button can delete the data.

Circle machine load area measurement:

Circle machine load measurement function is used to measure area around the land, set the position of the land meter in the vehicle and the nearest distance of the ground boundary,and then measure the boundary around the region.Then measuring around the boundary of the land.

①At the Circle machine load in parameter setting,press the ▲▼button to set the edge distance;

②After setting is completed,press the start to return main interface;

③Press the▲▼button switch function to “Circle machine load”in the main interface;

④In the main interface,press the【Start】button to measure at starting point .

⑤Press the【Stop】button to pause measurement and view data after agricultural machinery work is completed；If the measurement is not completed,press the 【Start】 button again to continue the measurement. If the measurement is completed,press start to save the data.