Handheld GPS Survey Equipment Mountain Slope Flat Land Measurement High Accuracy Land Measuring Device
① On the home page of boot,press the▲▼button to switch measurement mode;
② On the home page of boot,press the【Enter】button to view the current measurement mode and the parameter setting.
① Turn on the land meter in an open field;
② After started up,it needs to search for signal;There are voice prompts,text prompts,signal state and HDOP value on the screen;It is recommended to start measuring when the HDOP value is below 1.0.
③ After finishing searching for signal,it can start measuring according to function demands.
① At the starting point,press the【start】button to measurement in the main interface.
② Return to the starting point in a circle around the ground,press the【stop】 button to pause the measurement and view the measurement data.
③ Press the "Start" button to end measurement and save data.
• Mountain area measurement (just for S4)
① At the starting point,press the ▲▼to switch function to “Mountain”mode in the home interface;
② Press the 【Start】button to measure at the top of the mountain,then press the 【Enter】 button to confirm the information.
③ Press the【Enter】button and proceed from the foot of the mountain,walk around the foot of the mountain,and back to the starting point,press the【Enter】button,then press the【Stop】button to end measure and view data;
④ press "Start" to save the data.
• Intelligent slope measurement
The way of measuring is similar to normal area measurement.(please refer to normal area measurement method)