GNSS GPS Survey Equipment Agriculture GPS Area Measurement Device Slope Measurement Tool

Fixed width of GNSS GPS survey equipment:

①On the home page of boot,press the 【Settings】button to enter the settings interface；

②Press the▲▼button move to“Parameter setting”；Press the【Enter】button to enter；

③Press the【Enter】button to the fixed width;

④Press ▲▼ button to adjust the value of number;

⑤After finishing setting,press the"power" button to exit.

• The edge distance of circle machine load:

①On the home page of boot,press the 【Settings】button to enter the settings interface；

②Press the▲▼button move to“Parameter setting”；Press the【Enter】button to enter；

③Press the【Enter】button to the circle machine load;

④Press ▲▼ button to adjust the value of number;

⑤After finishing setting,press the "power"button to exit.

• The machine width of round-trip machine load

①On the home page of boot,press the 【Settings】button to enter the settings interface；

②Press the▲▼button move to“Parameter setting”；Press the【Enter】button to enter；

③Press the【Enter】button to the round-trip machine load;

④Press ▲▼ button to adjust the value of number;

⑤After finishing setting,press the "power"button to exit.

•Longitude and latitude

In the home interface, longitude and latitude, altitude information.(real-time update of longitude and latitude information)

• System setting

• Voice volume

①On the home page of boot,press the 【Settings】button to enter the settings interface；

②Press the▲▼button move to“System setting”；Press the【Enter】button to enter；

③Press the【Enter】button to the voice volume;

④Press ▲▼ button to adjust the value of number.

• HDOP limitation

①On the home page of boot,press the 【Settings】button to enter the settings interface；

②Press the▲▼button move to“System setting”；Press the【Enter】button to enter；

③Press the【Enter】button to the HDOP limitation ;

④Press ▲▼ button to adjust the value of number；

⑤After finishing setting,press the "power" button to exit.

Note: Measurements can only be made if the HDOP value is lower than or equal to the set value.