High Accuracy Handheld GPS Mountain Slope Flat Area Distance GPS Land Measuring Instrument

GPS Machine Interface Display:

Product Parameters Of GPS Land Measuring Instrument:

Product Function Introduction Of GPS Land Measuring Instrument:

Built in barometer of this S4 land meter instrument, accurate to measure altitude. There is intelligent mountain area measurement mode in this

device. The combination of barometer and GPS dual satellite positioning makes the measurement of mountain area more accurate and easy.

Mountain Measurement

1. In the main interface,press the [▲/▼] to switch function to “Mountain".

2. Press the [ Start] button to measure at the top of the mountain, and press the [Enter] button to confirm the information.

3. Press the [Enter] button and proceed from the foot of the mountain, walk around the foot of the mountain,and back to the starting point,press

the [Enter] button,then press the [Stop] button to end measure and view data.

4. Press "power" button to save the data.

Round-trip machine load

. At the Round-trip machine load in parameter setting,press the [▲/▼]button to set the width.

. After setting is completed,press the to return main interface.

. Press the [▲/▼]button switch function to Round-trip machine load"in the main interface.

. Press [Start] button at the starting point to start the measurement at the beginning of the work.Press the [Stop] button to pause measurement

and view data after agricultural machinery work is completed;If the measurement is not completed,press the [Start] button again to continue the

measurement. If the measurement is completed,press "power" button to save the data.

Intell Slope : at the starting point, press [Start/Stop] button to measure in the main surface; walk around the slope and press the [Start/Stop] button when you finished. Press the [Start/Stop] button to pause the measurement. Press the "power" button to end measurement and save data.

L/W mode : at the starting point , press the [Start/Stop] button to measure,and press the [enter] button to save information; Going from point to another point, press the [enter] button to save information; then going from this point to the finial point, press the [enter] button to save information; at last, press the [Start/Stop] button to view the measurement data; press the "power" button to end measurement and save data.

Normal distance mode: at the starting point, press [Start/Stop] button to start measuring ;Walk along the measuring line to the

end point and press the [Stop] button to stop the measurement and view the measurement data;If the measurement is not

completed,press the[Start]button again to continue the measurement. If the measurement is completed,press "power" button

to save the data.

Normal mode : at the starting point, press [Start/Stop] button to measure in the main surface; return to the starting point in a

circle around the ground, press the [Start/Stop] button to pause the measurement data. Press the "power" button to end

measurement and save data.

Shutdown:

Press the button for about 2 secs and the shutdown page appears, press the [enter] button to confirm the shutdown.