Suspension Air Spring Rear Right 1995-2002 Year Lincoln Continental Air Ride Kit

The Description Of Air Suspension Spring

The air suspension that people mentioned, to be precise, is a suspension that uses an air spring as an elastic element. In order to achieve height and stiffness control, an electronic control system and an air pump are usually added. Air springs are widely used in vibration isolation of automobiles, buses, rail vehicles, machinery and equipment and building foundations. Air springs are generally made of rubber and must have good airtightness and compressibility. After the compressed gas with the air pressure of 0.5-1MPa is charged into the air spring, the compressibility of the gas is used to realize its spring function. Its spring stiffness is variable. When the load acting on the spring increases, the gas in the airtight container is compressed, the air pressure increases, and the spring stiffness increases; on the contrary, when the load decreases, the air pressure in the spring decreases and the stiffness decreases. Therefore, it has ideal variable stiffness characteristics to ensure that the natural frequency of the body remains basically unchanged under different loads.

LINCOLN CONTINENTAL AIR SPRING

Part Number:503009

Original Equipment Number:3U2Z5580MA,3U2Z5580HA,3U 2Z5580 MA,3U 2Z5580 HA,3U-2Z5580-MA,3U-2Z5580-HA

Construction Year:1995,1996,1997,1998,1999,2000,2001,2002

Car Make:Lncoln

Car Model: Lncoln Continental

Position:Rear Right

Package Includes: Air Spring

Gross Weight:1.3kg

Package Box Size:30*14*14 (cm)

This air spring closely matches your original air spring, giving you greater comfort and safety. This new rear air spring fits the right side of Lincoln Continental (4.6L V8) vehicles. Our air springs are made of high quality rubber with a strong seal.

Guomat part number 503009,it is the brand new and high-quality that can replace the original air spring of your car.This air spring closely matches your original air spring,giving you greater comfort and safety.This new rear air spring fits the right side of Lincoln Continental(4.6L V8) vehicles.

The key Line In The Production Of Air Spring

1.Place an additional layer of magnet coils on the air spring: After the material of the bottom layer of the air spring is dried, place an additional layer of magnet coils in the structural connection function according to the design requirements.

2.The air spring is hot-melted to lay a large surface waterproof coating, after positioning the waterproof material, rewind the wire machine again, point the connection between the bottom and the bottom layer, melt the air spring at the bottom of the magnet coil, rotate the magnet coil forward when the temperature rises, and rotate it with a roller to make the magnet The coil is firmly bonded to the base, and the specification and moving speed of the spark are adjusted. When the surface of the magnet coil is just melted, the working temperature of the air spring should be too close in the middle of 200℃-230℃, and the waterproof material will be baked, resulting in the adhesion cannot be opened. . If the spark is small or the distance is far away, the surface of the waterproof material is not sufficiently melted, and the bonding with the bottom layer is not strong.

3. After the front layer of the waterproof magnet coil is hot-melted, the hot-melt magnet coil is pasted, and the edges are hot-melted, scraped with putty and flattened to make an air spring that melts in the gap. It is required that there is no expansion or contraction.

4. After laying the front layer of waterproof paint and hot-melt edging strip on the air spring, slowly lay two layers of waterproof paint (with gabbro), the standard specification is the same as that of the front layer of waterproof paint. Airtightness with Acrylic Paint Industrial Coatings.

5. The tail of the air spring waterproof material is fixed with metal rods, etc., and the airtightness is sealed with rubber.

About Payment And Shipping