Input volt | AC/DC 12V |
Power | 48W |
CCT | Warm white 3000K, Pure white 6000K, RGBW with remote, RGBWW with remote |
Lumen | 3800lm |
Size | D295xH70mm |
IP Rating | IP68 |
Warranty | Two years |
Materials | Plastic |
Packing | 10 piece/ carton, 64x33x44cm/CTN, 20kg/CTN |
Power cable | 1.5 meter |
Installation | Wall mounting |
Notes
1. This lamp is a hanging type, which is installed on the wall of the swimming pool, so it can only be installed in the cement pool, not in the plastic pool or plastic film pool.
2. It can work at AC12V and DC12V voltage, but if your lamp is mixed color, such as RGBW and rgbww, it's better to connect AC12V, because only AC12V can make their color synchronized.
3. RGBW includes red, green, blue, cyan, yellow, purple, white, pure white, and some dynamic modes.
Rgbww includes red, blue, green, cyan, yellow, purple, white, warm white, and some dynamic modes.
4. A remote control can control 2-5 mixed color lights, but the buyer can't reduce the cost by buying less remote control, because we also need to install a signal receiver in each light. If there is no signal receiver, the buyer can't control the lights, and the cost can't be reduced.
Packing
1. If you choose the lamp in single color(pure white/warm white/blue).
*1 piece x LED Pool Lamp
*1 piece x installation board
*1 bag x installation screws
2. If you choose RGBW with remote or RGBWW with remote.
*1 piece x LED Pool Lamp
*1 piece x Remote(battery is not included, it needs 12V, 23A/ 27A version)
*1 piece x installation board
*1 bag x installation screws