Temperature Detect Face Recognition Security Camera For Office Building

Introduction:

- The temperature measuring device should be used in a room with a room temperature between 10 ℃-40 ℃. Do not install the temperature measuring device under the vent, and ensure that there is no heating source within 3 meters;

- Personnel entering the room from a cold outdoor environment will affect the temperature measurement accuracy. The forehead temperature test should be performed after the forehead is unobstructed for three minutes and the temperature is stable;

- The temperature read by the temperature measuring device is the temperature in the forehead area. When there is water, sweat, oil or thick makeup on the forehead or the elderly have more wrinkles, the read temperature will be lower than the actual temperature. Make sure there is no hair or clothing covering this area.

Features:

1.Built-in non-contact high-precision thermal imaging module + live detection in one

2.Temperature detection range 30℃~42℃,Precision±0.3℃

3.Support human body temperature overlay,picture overlay

4.Support body temperature detection

5.Supports mask detection

6.Built-in FACE ++ deep learning face recognition algorithm,Stable and reliable

7.Support 20,000 face database

8.100 ms fast identification

9.7inch HD LCD display

10.Local alarm output after abnormal temperature

11.Face recognition, temperature detection, and mask recognition, Freely configure multiple usage modes

12.ultra-thin metal shell.

13.Can record identification information and temperature information, save traceability

14.Excellent environmental adaptability, adapt to low light and strong backlight, support automatic face exposure

15.Support Wigan protocol, can directly drive access control and control various gates

16.Rich hardware interface, integrated 100M Ethernet interface, audio interface, Wiegand interface, relay interface, TF card, USB and other interfaces

Why choose us?
1) Support 2W faces offline.

2) Face recognition distance is adjustable from 1 to 15 meters.

3) High-definition show display screen and a wide range of interface standards.
4) Entry control attendance software is simple to put in and operate. It makes use of MySQLl database.
5) We provide SDK. You should purchase our cameras or modules to develop your personal purposes.
6) ODM/OEM Services acceptable.

Questions & Answers:

Q: Maximum distance the camera can work?
A: 0.3-0.8, we suggest 0.5 meters as best.

Q: Maximum temperature tolerance?
A: Within 0.5 degrees Celsius.

Q: Maximum alarm temperature? Is it adjustable?
A: 37.5 degrees by default, upper and lower limits can be set manually.

Q: Whether it can be used outdoors?
A: Not recommended for use in environments with wind / rain and heat sources (sun, air conditioning, heating, etc.).

Q: Is it weatherproof /waterproof?
A: Not recommended for use in environments with wind / rain and heat sources (sun, air conditioning, heating, etc.).

Q: Whether can it use the battery?
A: Not supported, because often need to keep working for 24 hours.

Q: Does it support fast passing that only measures temperature?
A: Yes. You can only measure the temperature, or only recognize the faces.

Q: What should I do if I am over 180mm tall?
A: It is recommended to bend over, and the recommended mounted height is 130-140mm, (with average height of 160mm).

Q: What is the way to upload pictures and information?
A: Local upload (slower) or system upload and batch sync to device.

Q: Supported voltage and hertz range?
A: 100V-240V, 50-60hz.

Q: Where is the information kept?
A: Local memory and cloud background (LAN or open network).

Q: What installation methods?
A: Walls, turnstiles, brackets.

Q: Does it support large-screen simultaneous display?
A: Tablet images cannot be displayed directly on the larger screen. However, the platform software can display the same image for the tablet on the corresponding larger screen.

Q: Whether it can display a high temperature or dangerous face on a large screen?
A: This function can be tailored as per requirements (extra charge).

Q: Does it support finding a specific group of people?
A: This function can also be tailored as per requirements. Adopt different alarm sounds for different groups (extra charge).

Q: Supported languages currently?
A: Chinese and English.

Q: Does it support one-to-many?
A: Many devices can be synchronized in the background.

Q: Does it support NFC module?
A: Not support.

Q: Whether to support IC card swiping?
A: Module support can be added, but the functional rule protocol is not uniform.

Q: What data dimensions can be recorded?
A: Captured pictures /face pictures /recognition scores /whether temperature passes /whether temporary rules /names /person numbers /departments /post /device names /device number /device groups / capture time /creating time.

Q: Is it possible to customize different data dimensions
A: Extra charge as per corresponding requirements.

Specification: