SUS 304 Stainless Steel Slim Body Soft Wing Retractable Flap Barrier

Introduction:

Retractable Flap Barrier Turnstile is designed to control pedestrians entering or exiting restricted areas, usually used of high pedestrian traffic flow in both directions.The body is made from brushed stainless steel which creates a seamless and elegant access point to blend into most indoor environment.It can be integrated with any kind of access controller system (e.g.: RFID device, Push button, Fingerprint and Biometric device).
In case of emergency, the Optical Turnstile arm will open automatically to allow free passage.
Optical Turnstiles are suit for elegant and luxury entrance solutions.

Features:

1) Rapid identification technique, available to identify accurately and efficiently the magnetic card, bar code card, ID card and IC card.

2) DC Brushless Motor, Maintenance Free

3) On-line or off –line mode(optional)

4) Real time trouble self-detect and alarm indication, ensuring system safe operation and facilitating maintenance and operation

5) With direction indication, guiding passenger to entry and exit.

6) Self automatic locking to prevent forcedly passing without the card

7) Automatic counting and displaying number of passenger, facilitating observation and with a displaying total amount as high as 90,000

8) Light and sound alarm indication function, preventing illegal entry or irregular passing

9) Powerful on-line intelligent control mode, facilitating you:

A)To adjust the operation speed of the barrier according to the flow of passenger and improve the passing rate.

B)To set up operation mode for passage entry and exit.

C)To read card with multiple times, the special function meeting the application requirements of a particular site.

D)To set up the card reading with or without memory.

E)To select a reasonable normally open or close mode, to divert the flow of passengers effectively.

F) Setting function humanized for reset of over time passing.

10)The infrared sensing technique realizes real time monitor of passage, safe protection and tail-proof.

12) The processing mode in emergency or in special conditions.

13) Having standard input/output port, facilitating the integration of the system and the other equipment, to realize far end control management.

14) Super combination capability, with the combined application of products of different passage types and series, not affecting the system performance.

15) Strong system expending capability, available to add new product at any time

16) Far end control management: function to far end control of barrier mode, meeting the special requirements of the users and the fire protection

17) Resetting automatically. After reading card, if the passer didn’t pass at set time, the system will cancel pass permission automatically, the administrator can set the passing time by himself.

Specification:

Details:

1.With fault self-test and alarm prompt function, convenient for user maintenance and use.

2.Through the built-in small push-pull on the main control board, device operating state can be programed.

3.The mechanical structure has anti-pinch and anti-collision function. When the swing arm is blocked during the reset process, the motor automatically stops working within the specified time. Reset again after the default delay (until reset), and the force is very small (≤ 2kg).(In the extreme case, all infrared rays are disabled, and the movement still has mechanical anti-pinch function, and the strength is small and will not cause harm to the human body)

4. Illegal intrusion, trailing alarm, reverse intrusion gate automatically closes

5.Anti-shock function, the arm is automatically locked when no open signal is received.

6.Telescopic arms are adjustable synchronously (for double pendulum)

7.With automatic reset function. After the switch is opened, the system will automatically cancel the user's permission for the pass when there is no pass within the specified time.The reset time is adjustable from 1s to 60s (the system default time is 10s). After the power is cut off, the channel is automatically opened (in accordance with fire protection requirements), and the power-on channel is automatically closed.

8.Infrared sensor reset, infrared sensor anti-trap function (configure 5 pairs of infrared)

9.It can be connected with a variety of devices such as access control systems, consumer systems, electronic ticket systems, biometric systems, and electrostatic testers.

10.The one-way or two-way control personnel can enter and exit, and the infrared sensing in and out channels.

11.Voice prompt function.

12.Remote control and management can be achieved directly through the management computer.

FAQ:

1.Can machines be used outside?

With waterproof function, could be used outside

2.What is the warranty for the machine?

Whithin two years, if any problems, we will offer the accessories

3.When will you make the delivery?

Regular products:(3-5 days)

4.How does your factory control the quality?

Quality controlling from the beginning to the ending.

5.What is your MOQ?

Any quantity is acceptable.

6.payment term?

30% by T/T, 70% by T/T before delivery.