SUS304 Swing Barrier Turnstile Access Control Security Systems

Product Details:

Common speed gate barrier turnstile are divided into two types, scissor doors (wing gates) and swing doors according to the different movement modes of the door wings.
(1) Scissor doors are often used in rail transit, and common scissors doors are mostly used in subways and other places. The door wings protrude from the inside of the box, which can effectively close the passage and play a role in controlling access. In addition, the door is equipped with an infrared sensing device, which can realize the purpose of "one person, one card: single pass.
(2) Swing doors appear later than scissor doors and belong to the second generation of speed-pass doors. This category The characteristic of the speed-pass door is that the direction of the door wing is forward and backward. The operation process is within the sight of the human body, which is safer. In addition, because the door wing does not need to be retracted into the box, the style of the swing door is more changeable. Due to the above characteristics , Swing doors are generally used in banks, corporate buildings, high-end office buildings, etc.

Specification:

Functions:

1. Anti-tailing function: There are infrared light band detection areas in the channel, and the switch state can be adjusted by software according to the customer's accuracy requirements. The application of light bands can adapt to different needs to avoid the shortcomings of point-type infrared detectors that are easy to be contaminated and affect the reliability of judgment. It can effectively determine the trailing party of the unread card. When the system determines that a trailing occurs, the system will react according to the position of the valid cardholder returned by the infrared detector. After the door open signal is issued, there are still some abnormal uses that will trigger an alarm.
2. Abnormal usage conditions:
(1) When the door is closed, the pedestrian enters in the reverse direction. After the authorized door opening signal is issued, the pedestrian enters the door, and before passing the first safety photoelectric detection belt, if the reverse detection belt detects that someone has entered, If the person does not leave, the buzzer will always sound the alarm, the door will remain closed, and the "aging" function will not calculate the time interval at this time.
(2) Reverse intrusion when the door is opened. After the door wing is opened, if an unauthorized pedestrian enters the door detection area in the reverse direction, the door will be closed immediately, as long as the first protective detection belt detects the presence of someone, "Time Limitation" The function does not calculate the time at this time, and the door resumes normal operation when the person leaves the second detection zone.
(3) When the pedestrian leaves, the pedestrian enters the second safety detection zone in the reverse direction. Before the door returns to the basic state, the second safety detection zone detects someone entering again without a legal door opening signal, and the alarm system issues an alarm. But as long as the protection detection area still detects people, the door will not close.
(4) Following closely from the first detector detecting the pedestrian to the last detector when he leaves the first safety detection belt, the time gap is about 0.25 seconds. After the pedestrian leaves the first safety detection belt, the reader signals Without opening the door, a pedestrian (trailing person) is detected in the first detection zone, the alarm sounds long, and the door remains open.
(5) After the normal trailing pedestrian leaves the protection detection zone, an unauthorized person is detected in the first safety detection zone, the door is immediately closed, and the alarm sounds long.
3. Drive: DC servo drive system and DC brushless drive system
4. The response of the door body in an emergency: When the door is in operation, there is a sudden power failure, the door wing will stop at the original position and can be pushed freely, or an external 12V battery can be connected (when the power is cut off, the battery will be briefly energized to open the swing door) According to requirements, each device can be equipped with an emergency button, and the selected emergency response mode can be activated by pressing the button. Under normal circumstances, the channel is opened in danger or panic. In emergencies, such as police and police, the channel can be closed manually through the remote control button. After power-on or in an emergency, the door wing will automatically reset after self-checking without obstacles.

FAQ:
1)What is Turnstile?
Turnstiles are a form of gate which allows only one person to pass at a time. This enables security to efficiently prevent potential trouble or to restrict any prohibited materials to enter into any secured premises.It can restrict passage only to people who insert /scan a ticket, an ID cards, access card , thus a turnstile can be used in the case of paid access for example public transport, or to restrict access to authorized people in corporate houses or entrances of any building.

2)Why choose KOMAI as your supplier?

We are a leading manufacturer of turnstile and speed gate in China.
We focus on pedestrian turnstile gates.
We keep stock for regular products and we can support small orders. Usually, our lead time is just 3 days.
Design products according to customers’ requirements.
Credibility: We are SGS certificated Supplier. Our customers are located over 50 countries
Gratitude: We cherish the business chance you give us and return you with quality products and good service.
Professional: We have been in this business for more than 8 years. We have a strong professional team with various experiences.
We keep doing new product development. Our goal is to enhance our competitive capacity constantly.
Price:Competitive price and good quality products
Quality: we do 100% inspection before the shipment.
Promise: we are always ready to take the responsibility if any loss caused to our customer due to our mistakes.

3)What is the Lead time?
1-3days for sample in stock;7-15days for special sample order.7-30days for bulk order.

4)What is the Payment term?
30% deposit and the outstanding payment should be cleared before shipment.(Notify us if you have special requirements)

5) How is your Packaging?
International standard seaworthy plywood case

6)Do you provide OEM service?
Yes.we accept both OEM and ODM.