Application method of thread ring gauge
Usage of thread ring gauge: screw two ring gauges onto the external thread to be tested in

random order

1. The non-stop gauge passes through the small pitch diameter, and the product is unqualified.

2. The general gauge can not be screwed. The pitch diameter of the thread is large, and the

product is unqualified.

3. the go gauge can rotate freely at any position of the thread. The non-stop gauge can be screwed

for one to two or three turns. Sometimes it can be screwed for one or two more turns, but the end

face of the gauge cannot be screwed until the thread head is out of the ring
At this time, it means that the pitch diameter of the external thread you tested is just within the

"tolerance zone", which is a qualified product.

Thread ring gauge is used to measure the correctness of external thread size. The through end

is one piece and the dead end is one piece.

The stop ring gauge has a groove on the cylindrical surface. Threaded ring when size is above

100mm
The gauge is of double shank thread ring gauge type. Specifications are divided into coarse teeth,

fine teeth and pipe threads.

pitchThe thread ring gauge and pitch of grade 2 accuracy of 0.35mm or less and higher than grade 2

accuracy areTaper ring gauges of grade 3 accuracy of 0.8mm or less have no end stops
"Thread ring gauge" is a kind of "measuring tool", which is used to detect the pitch diameter of

standard external threadSet a go gauge and a no go gauge. The pitch diameter of the internal thread

of the two smooth ringgauges shall be in accordance with the standardThe manufacturing accuracy

of the maximum and minimum limit dimensions of thread pitch diameteris very high.

SpecificationsThere are as many varieties as common external thread screws.

Thread ring gauge thread gauge pass size the maximum solid profile of the thread to be measured,

and inspect the thread to be measuredWhether the effective pitch diameter exceeds the pitch

diameter of the maximum solid tooth profile,and check the actual ruler of the bottom diameter

at the same timeWhether the inch exceeds its maximum physical size.

Adjustable Leveling Foot Parameter

Adjustable Leveling Foot Size

Adjustable Leveling Foot Material

Adjustable Leveling Foot Describe

Application.

Adjustable Leveling Foot Scope of application

About us.

KTC.